- Joined
- May 3, 2025
- Messages
- 813
- Reaction score
- 2
A new product by Bin is available: Z4 G29 20i B48B20O1 — MG1CS201 SWFK_00006432 Bosch — Calibration File B48B20O1 - BMW Stage 1 — SW: SWFK_00006432.050.200.007 — A precision tune for the B48 engine, designed to enhance performance and deliver a true roadster feel.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Z4 G29 20i B48B20O1 — MG1CS201 SWFK_00006432 Bosch — Calibration File B48B20O1
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | BMW |
| Series: | Z4 |
| Build (Vehicle): | G29 |
| Model: | 20i |
| Modelyear: | 2020 |
| Motorcode: | B48B20O1 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 2.0 L |
| Output: | 197 PS / 144.9 kW |
| Gear: | Automatic transmission |
| Use: | Engine |
| Producer (ECU): | Bosch |
| Build (ECU): | MG1CS201 |
| ECU-Nr. Prod.: | SWFK_00006432.050.200.007 |
| ECU-Nr. ECU: | DME84T0-B48-S15A-G29-B48B20O1-RWD-ECE-SEU6d-TEMP-OPF-PVL____________________________________________#R4C9H5S8BOMHX2 |
| Software: | R4C9H5S8B |
| Checksum: | N/A |
| 8-Bit sum: | 1760 |
| Versions: | 1 modified version included (Stage 1) + Original for reference |
| Modified by: | B&C Consulting,Scott BCA |
| Project type (Project): | Complete binary file |
| Read Hardware: | Autotuner Bench |
| Project state: | in development |
| Data areas: | 1: 100100-1FF7DF |
| Project type (Reseller): | Tuningfile |
| Details: | St1 |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Recalibrated torque model for a significant increase in power and acceleration
- Optimized boost pressure control for a stronger, more linear power curve
- Ignition timing and lambda targets revised for high-octane fuel
- Sharpened throttle response for an instant connection to the engine's power
- Automatic transmission torque communication adjusted for crisp, smooth shifts
- All factory engine protection systems are retained and recalibrated
Read more about this product...