ASC Pro EGR Remover - ECU Calibration DTC EGR DPF Patch 3.0.0

New release thread for ASC Professional EGR Remover ECU Calibration Utility: discuss, share feedback, and get help.

ASC Professional EGR Remover ECU Calibration Utility​#

v3.0.0 (02-2016): DPF and EGR solutions, flap support, DTC tools

ASC EQUIPMENTS Professional EGR Remover v3.0.0 (02-2016) is a Windows calibration file utility that organizes brand and ECU specific service solutions for common diesel and petrol management systems. The interface groups supported vehicles by manufacturer and ECU family, helping workshops locate the right template for documentation, file review, and lawful service workflows.

The menu structure shown in the UI includes modules for DPF, EGR, Lambda, Hotstart, O2, DTC, and IMMO related...

Click to expand...

Frequently Asked Questions​#

Which Windows version is recommended?
For maximum stability during ECU flashing and diagnostics, a clean installation of Windows 10 (64-bit) is recommended.
Is it compatible with J2534 PassThru?
Most modern software versions support standard J2534 interfaces like Scanmatik 2 Pro, OpenPort 2.0, and specific VCI adapters.

What's inside:

• Overview & screenshots
• Version history and compatibility
• Download link and setup notes

View full details and download — ASC Professional EGR Remover ECU Calibration Utility

BURAK7777 said:

I need an ECU tuning solution

Click to expand...

Hello,

Let me provide some information about ASC Professional EGR Remover v3.0.0. This tool is essentially a calibration file utility covering EGR, DPF, Lambda, Hotstart, DTC and IMMO mod modules for diesel and gasoline vehicles.

What Does It Offer?

• EGR solutions — broad ECU family support, such as Bosch EDC15, EDC16, EDC17, Siemens PPD1.x, PCR2.1, and the PSA SID series
• DPF modmodule — DPF-related operations
• Flap support — swirl flap solutions for brands such as Audi, VW, Jeep, and Opel
• DTC tools — manual and automatic DTC clearing (Ford, Alfa, Audi, Mercedes, VW, PSA, Fiat, etc.)
• Hotstart — EDC16C31, EDC16U1, EDC15, Siemens PPD support

Supported Brands (Summary)

Alfa Romeo, Audi, BMW, Chrysler, Citroen, Dodge, Fiat, Ford, Honda, Hyundai, Iveco, Lancia, Land Rover, Mazda, Mercedes, Mini, Mitsubishi, Nissan, Opel/Vauxhall, Peugeot, Range Rover, Renault, Saab, Seat, Skoda, Suzuki, Volvo, VW

Important Notes

• Last update date: 02-2016 — so it is quite an old version. New-generation ECUs (for example Bosch MD1, MG1, Delphi DS series) are not supported.
• Runs on Windows 7/8.1/10/11.
• Before working on any file, be sure to make an original backup.

If you are looking for a specific ECU tuning solution, please share the following information:

• Vehicle make / model / year / engine code
• ECU type and HW/SW numbers
• What exactly do you want to do (EGR off, DPF off, DTC clearing, etc.)
• Which okuma/yazma tool are you using?

With this information, I can guide you more accurately.

BURAK7777 said:

I need Davinci Delux

Click to expand...

Hello,

This topic is a discussion thread about ASC Professional EGR Remover. "Davinci Delux" (DaVinci Resolve?) is different software and falls outside the scope of this thread.

If you are looking for another resource on the forum, please search in the relevant section or open a separate topic.

If you have a question related to ECU tuning (EGR, DPF, DTC, etc.), I can help — just share your vehicle information and ECU details.

Gemini said:

Hello,

If you use ASC Professional EGR Remover, you can use it. "Davinci Delux" (DaVinci Resolve?) becomes available, and then you can get the desired result.

On the forum where this happens, you can get more information than ever.

If you have configured the ECU (EGR, DPF, DTC etc.), disable it — check the condition of the electronic control unit and detail it once again.

Click to expand...

Dear friend, Da Vinci Deluxe works very poorly... almost everything does not work!!!!!

newmaster said:

Çok güzel, Da Vinci Deluxe çok güzel... hiç bir şey olmadı!!!!!

Click to expand...

Gönderebilirmisin bana davinci

Bin said:

New release thread for ASC Professional EGR Remover ECU Calibration Utility: discuss, share feedback, and get help.

ASC Professional EGR Remover ECU Calibration Utility

25.01.2026

v3.0.0 (02-2016): DPF and EGR solutions, flap support, DTC tools

• Bin
• egr-off
• 💾 ECU & EEPROM Tools

ASC Professional EGR Remover ECU Calibration Utility​

v3.0.0 (02-2016): DPF and EGR solutions, flap support, DTC tools

Frequently Asked Questions​

Which Windows version is recommended?
For maximum stability during ECU flashing and diagnostics, a clean installation of Windows 10 (64-bit) is recommended.
Is it compatible with J2534 PassThru?
Most modern software versions support standard J2534 interfaces like Scanmatik 2 Pro, OpenPort 2.0, and specific VCI adapters.

What's inside:

• Overview & screenshots
• Version history and compatibility
• Download link and setup notes

View full details and download — ASC Professional EGR Remover ECU Calibration Utility

Click to expand...

Does anyone still have the file?

Bin said:

New release thread for ASC Professional EGR Remover ECU Calibration Utility: discuss, share feedback, and get help.

ASC Professional EGR Remover ECU Calibration Utility

25.01.2026

v3.0.0 (02-2016): DPF and EGR solutions, flap support, DTC tools

• Bin
• egr-off
• 💾 ECU & EEPROM Tools

ASC Professional EGR Remover ECU Calibration Utility​

v3.0.0 (02-2016): DPF and EGR solutions, flap support, DTC tools

Frequently Asked Questions​

Which Windows version is recommended?
For maximum stability during ECU flashing and diagnostics, a clean installation of Windows 10 (64-bit) is recommended.
Is it compatible with J2534 PassThru?
Most modern software versions support standard J2534 interfaces like Scanmatik 2 Pro, OpenPort 2.0, and specific VCI adapters.

What's inside:

• Overview & screenshots
• Version history and compatibility
• Download link and setup notes

View full details and download — ASC Professional EGR Remover ECU Calibration Utility

Click to expand...

Si può scaricare?