BMW 535d E60 EDC16CP35 500776 O_28CT87 400HP

  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None

Bin

Thread Owner
Administrator
Joined
03.05.2025
Messages
1,661
Reaction score
15,368
BMW 535d (E60/E61) Tune File — EDC16CP35 500776 / O_28CT87 — ~400+HP Setup

ECU / File

- ECU: Bosch EDC16CP35/C (BMW)
- MCU: MPC563 RevA
- Read type: full vеrsiоn Flash (BDM)
- File size: 2MB (2,097,152 bytes)

Identifiers
- Bosch SW (full vеrsiоn): 1037500776
- Bosch SW (WinOLS short): 500776
- Variant: 390T867A
- CAL ID: O_28CT87
- SW/VERS: 0089RR0AT87BEUD20
- Build path: 99/1/EDC16CP35/011/390/0T0805/

Claims / Limits (as seen in the calibration)
- Power: ~400+ hp (hardware dependent)
- Max IQ: ~100 mg/stroke
- Boost limit: ~2800 mbar ABS
Note: 3800 mbar ABS ≈ ~2.8 bar gauge at ~1000 mbar ambient (do not confuse ABS vs gauge)

Performance (reported)
- Dragy 100–200 km/h: below 11.0 seconds (reported on forums / user results)

Important warning
- Many people ask around $100 for this exact file on forums.
- Be careful: a lot of OEM limiters are removed/relaxed in this calibration.
Use only if you understand the risks and log everything (EGT, smoke, boost/rail, gearbox/torque control, etc.).
- VIN/ISN not found in clear text (placeholder seen: ZZZZ3333).

Hashes
- MD5: da4e8e2f9bd9527259061a165a111eca
- SHA-256: 169eeb9527d2f0feb65f696b8adbd5e80e2281fdca817665a95fa6d8a8b76b9e
 

Attachments

DISCLAIMER: Shared for educational use only. I’m not the author and provide no warranty or support.
Flash/use at your own risk. You are fully responsible for any damage (engine/turbo/gearbox, etc.).
This calibration has many OEM limiters removed/relaxed and is NOT a safe plug-and-play tune.
 
Back