Post #1
Online now
- Joined
- 05.11.2026
- Messages
- 2
- Reactions
- 0
- Location
- Indonesia
Hello friends...
My name is Wily Gunawan, and I am from Indonesia.
My car is a Chevrolet Captiva 2.0 (C140) with a diesel engine. Its factory-standard output is 163 PS at 3,800 rpm and 360 Nm between 1,750 – 2,750 rpm.
It uses a Delphi DCM 3.7 ECU.
I have made the following modifications to my car:
1. Installed a performance air filter.
2. Removed the swirl flaps from the intake manifold.
3. Replaced the DPF with a free-flow pipe.
4. Replaced all the stock intercooler hoses with aluminum piping.
5. Installed an aftermarket performance exhaust system.
Could you provide a tuning file suitable for these modifications (specifically with the DPF, EGR, and swirl flaps disabled, along with any other adjustments appropriate for my setup)?
I am using a Scanmatik 2 Pro (clone) to read the ECU file from my car.
I have attached my car's original (stock) file along with the other relevant information.
Thank you.
My name is Wily Gunawan, and I am from Indonesia.
My car is a Chevrolet Captiva 2.0 (C140) with a diesel engine. Its factory-standard output is 163 PS at 3,800 rpm and 360 Nm between 1,750 – 2,750 rpm.
It uses a Delphi DCM 3.7 ECU.
I have made the following modifications to my car:
1. Installed a performance air filter.
2. Removed the swirl flaps from the intake manifold.
3. Replaced the DPF with a free-flow pipe.
4. Replaced all the stock intercooler hoses with aluminum piping.
5. Installed an aftermarket performance exhaust system.
Could you provide a tuning file suitable for these modifications (specifically with the DPF, EGR, and swirl flaps disabled, along with any other adjustments appropriate for my setup)?
I am using a Scanmatik 2 Pro (clone) to read the ECU file from my car.
I have attached my car's original (stock) file along with the other relevant information.
Thank you.
