- Joined
- 03.05.2025
- Messages
- 1,460
- Reaction score
- 3,800
A new product by Bin is available: Crossfire 3.2i V6 — ME2.8 365223 Bosch — ECU Tune 0261208425 - Chrysler Stage 1 — ECU: 0261208425 / SW: 365223 — A responsive performance tune for the V6 engine, designed to improve throttle feel and mid-range torque.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Crossfire 3.2i V6 — ME2.8 365223 Bosch — ECU Tune 0261208425
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | Chrysler |
| Series: | Crossfire |
| Model: | 3.2i V6 |
| Modelyear: | 2004 |
| Type (Engine): | Naturally Aspirated Petrol |
| Displacement: | 3.2 L |
| Output: | 211 PS / 155.2 kW |
| Gear: | Automatic transmission |
| Use: | Engine |
| Producer (ECU): | Bosch |
| Build (ECU): | ME2.8 |
| ECU-Nr. ECU: | 0261208425 |
| Software: | 365223 |
| Checksum: | N/A |
| CPU: | Infineon C167CR |
| 8-Bit sum: | 114A |
| Versions: | 1 modified version included (Stage 1) + Original for reference |
| Modified by: | B&C Consulting,Bruno |
| Project type (Project): | Eprom |
| Project state: | in development |
| Data areas: | 0: |
| Project type (Reseller): | Tuningfile |
| Details: | st1 |
| Project Size: | 524 288 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Improved throttle mapping for a more direct and responsive pedal feel
- Optimized ignition timing for increased torque throughout the RPM range
- Air-fuel ratio (lambda) targets adjusted for improved power
- Torque model adjusted for the automatic transmission for smoother, more decisive shifts
- All factory engine safety systems remain fully active
Read more about this product...
