I need Virgin pls PSA delphi dcm3.5 and tool for read eeprom

Gemini said:

Diagbox V9.85 is perfect — fully supports your 2020 Expert 3 with DCM3.5.

You are good to go. Here is your full procedure:

Step by step:

1. Read EEPROM with KTAG from the ECU (on bench)
2. Flash virgin EEPROM back to the ECU with KTAG
3. Install ECU in the car
4. Connect Diagbox V9.85 with compatible VCI (PSA COM / MDI2)
5. Open Diagbox → select vehicle → go to BSI
6. Navigate to: Repair → Immobilizer → Engine ECU Learning
7. Enter the PIN code when prompted
8. Diagbox will pair the BSI with the virgin ECU automatically
9. Turn ignition off, wait 10 seconds, start the car

What you need:

• Virgin EEPROM file for your HW (upload your current EEPROM read and I'll check)
• PIN code of the vehicle
• Compatible VCI interface for Diagbox (PSA COM or MDI2)
• All keys present during the procedure

Now upload your KTAG EEPROM dump and I'll verify it and help you with the virgin file.

Click to expand...

This

Gemini said:

Diagbox V9.85 is perfect — fully supports your 2020 Expert 3 with DCM3.5.

You are good to go. Here is your full procedure:

Step by step:

1. Read EEPROM with KTAG from the ECU (on bench)
2. Flash virgin EEPROM back to the ECU with KTAG
3. Install ECU in the car
4. Connect Diagbox V9.85 with compatible VCI (PSA COM / MDI2)
5. Open Diagbox → select vehicle → go to BSI
6. Navigate to: Repair → Immobilizer → Engine ECU Learning
7. Enter the PIN code when prompted
8. Diagbox will pair the BSI with the virgin ECU automatically
9. Turn ignition off, wait 10 seconds, start the car

What you need:

• Virgin EEPROM file for your HW (upload your current EEPROM read and I'll check)
• PIN code of the vehicle
• Compatible VCI interface for Diagbox (PSA COM or MDI2)
• All keys present during the procedure

Now upload your KTAG EEPROM dump and I'll verify it and help you with the virgin file.

Click to expand...

This is the eeprom i need the virgin read by xprom

HISO said:

This

This is the eeprom i need the virgin read by xprom

Click to expand...

Sorry, I can’t help create/provide a “virgin” version of this EEPROM (or instruct how to modify it) for immobilizer bypass.

What I can do: help you get the correct virginization safely with Diagbox V9.85.

To proceed with a proper, legitimate ECU learning/virgin procedure, please tell me:

• Vehicle: Peugeot/Citroën model + engine + year (confirm it’s Expert 3 / 2020 HDi)
• ECU/CM version: DCM3.5 confirmed, and any full HW/SW numbers printed on the ECU label (format like “HW: xxx / SW: yyy”)
• What you have to virginize: BSI+ECU learning from Diagbox, or virgin EEPROM already?
• Your X-PRO M connection: are you reading only (dump), or do you want to write/virginize via X-PRO M?
• Read type: is your dump a full EEPROM read (all 8.00KB), and what tool/programmer/wiring?

From your dump preview, I can see it contains the string “NOT VIRGIN” and “T6A6VA00DELIV9…”, so this is clearly not virgin yet—but the exact “virgin” content must be generated/handled by the official immobilizer learning process (Diagbox), not by manual dump editing.

If you want, upload the full EEPROM file you have (not only preview) plus the ECU HW/SW numbers from the label, and I’ll guide you on the correct Diagbox immobilizer/engine ECU learning steps for your exact variant.