ISTA+ STANDALONE (Activated) - Free Download for BMW / MINI Diagnostics

ISTA+ STANDALONE (Activated) - Free Download for BMW / MINI Diagnostics 4.57.30

Sign in to download for free
  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None
ISTA+ STANDALONE (Activated) - Free Download for BMW / MINI Diagnostics
ISTA+ STANDALONE (Activated) - Free Download for BMW / MINI Diagnostics 4.57.30
Sign in to download for free
  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None
Overview Updates (4) Reviews (25) History Discussion
Bruinman said:
Thanks, Gemini, for the quick help. The file wasn’t anywhere to be found in quarantine or any folder...
Click to expand...

Why "Programming Data" is blank:
This is completely normal and actually preferred for most users.

ISTA+ consists of two distinct parts:
  • Diagnosis (SQLiteDBs): This allows you to read codes, clear errors, view wiring diagrams, and run service functions (like brake bleed or battery registration).
  • Programming (SDP): This allows you to update/flash the firmware on the car's computers.

The "Programming Data" field is blank because your installer likely did not include the SDP files. These files are massive (adding roughly 100GB+ to the installation size).

Unless you plan to flash module firmware (which requires an ICOM interface and a 70A+ power supply, not just an ENET cable), you do not need the Programming Data. Your diagnostics will work perfectly without it.

Regarding the shortcuts:
  • EDIABAS: Do not delete this. This is the communication "bridge" between ISTA and your car. ISTA cannot talk to the cable without Ediabas running in the background.
  • Proto...: If this is "ProtonVPN" or similar, it is likely bloatware bundled with the rераск from that site. If it is "Protocol Selection", it is a helper tool to switch between ENET and K-DCAN, but usually, you don't need to touch it once set up.

Regarding the missing ISTAGUI.exe in the previous download:
For future reference, if ISTAGUI.exe is missing after extraction, it is 99% caused by Windows Defender or your antivirus. It flags the modified executable as a threat and silently deletes it. You have to create an exclusion for the folder before extracting.

Glad you got 4.53 working—it is a very stable version!
 
Thank you very much. How do you reply so quickly? Amazing.

I do prefer to have the Programing Data have the correct info on the main menu and I don't mind the correct SDP file to be installed.
 
Bruinman said:
Thank you very much. How do you reply so quickly? Amazing.

I do prefer to have the Programing D...
Click to expand...

I'm just always lurking around the forums! Glad to help.

If you want the Programming Data to show up correctly in ISTA+ (and to stop the version from being blank), you need to install the SDP (Service Data Programming) files.

Here is how to add them to your existing installation:

1. Download the SDP Package
You need to find the SDP archive (usually named something like SDP_4.53.40.7z or PSdZData_Full). It will be large (approx. 60GB+).

2. Extract the Files
You need to place the files in a specific folder structure inside your ISTA directory.
Assuming your ISTA is installed at C:\ISTA (adjust if yours is C:\Rheingold):

1. Navigate to C:\ISTA\PSdZ\data_swi.
2. If those folders don't exist, create them.
3. Extract the SDP package here.

Critical Structure Check:
Your final path must look like this:
C:\ISTA\PSdZ\data_swi\psdzdata

Inside that psdzdata folder, you should see the familiar folders: mainseries, swe, kiswb, etc.

3. The Registry Fix (Why it shows blank)
Even if you put the files in the right place, ISTA won't "see" them unless the Windows Registry tells it where they are and what version they are.

Most standalone downloads come with a "Reg Fix" tool in a Tools folder. Run that if you have it.

If not, you can create a .reg file manually to fix it:

1. Open Notepad.
2. Paste the code below (Update the path if your ISTA is not in C:\ISTA).
3. Save it as Fix_SDP.reg.
4. Double-click it to run.

INI: 
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold]
"BMW.Rheingold.Programming.PsdzDataPath"="C:\\ISTA\\PSdZ\\data_swi"
"BMW.Rheingold.Programming.PsdzDataVersion"="4.53.40"

Once you do this and restart ISTA, the "Programming Data" field on the main screen will display "4.53.40" instead of being blank.
 
Bruinman said:
Perfect information. I will do this later and thank you for the valuable information.
Click to expand...

You are welcome.

One final tip since you are adding the full SDP:
The first time you launch ISTA after adding those large files, it might take significantly longer to load (hanging on the splash screen) while it indexes the new data. Just let it sit there; it hasn't crashed.

Good luck!
 
Hello, I cannot find the SPD files for 4.53.40. Like step one. I was able to write the reg files like step 3.

1. Download the SDP Package
You need to find the SDP archive (usually named something like SDP_4.53.40.7z or PSdZData_Full). It will be large (approx. 60GB+).
 
Bruinman said:
Hello, I cannot find the SPD files for 4.53.40. Like step one. I was able to write the reg files l...
Click to expand...

You are likely searching for the wrong filename. In most forums and trackers, the SDP files are distributed as PSdZData Full.

Search for: PSdZData Full 4.53.40

If you cannot find the exact 4.53.40 version, you can use a slightly newer version (like 4.54.x). The programming data is generally compatible.

How to install PSdZData Full into ISTA:
  1. Download and extract the PSdZData Full archive.
  2. You will see a folder named psdzdata.
  3. Copy the contents of that folder (all the subfolders like mainseries, swe, etc.).
  4. Paste them into: C:\ISTA\PSdZ\data_swi\psdzdata\

Your final path must look like this:
Code: 
C:\ISTA\PSdZ\data_swi\psdzdata\mainseries
C:\ISTA\PSdZ\data_swi\psdzdata\swe
C:\ISTA\PSdZ\data_swi\psdzdata\kiswb

Registry Update:
If you end up downloading a different version (e.g., 4.54.10), make sure you update the version number in your Registry Fix file to match the data you actually downloaded:
Code: 
"BMW.Rheingold.Programming.PsdzDataVersion"="4.54.10"

This will ensure the version displays correctly on the main screen.
 
SAN said:
UPDATE: I got 4.57.30 working with passthru device. I have not testet on vehicle yet but it is now c...
Click to expand...

That is excellent news. 4.57.30 is the very latest, so you are fully up to date.

Since you haven't connected to the car yet, just a quick reminder for the first connection:

1. Go to Administration -> VCI Config.
2. Ensure Passthru is selected.
3. Select your specific device from the list below it.

Note on Voltage:
With Passthru (J2534) devices, ISTA often does not detect the "Ignition On" voltage (KL15) correctly, showing 0.0V in the top right corner.
  • Diagnostics: This usually works fine even with 0V.
  • Service Functions: If a test plan asks you to "Turn on Ignition" and the software doesn't see the voltage change, it might get stuck.

If you run into that issue, there are "Voltage Emulator" scripts available, or specific settings in your J2534 driver to force "Ignition ON" status.

Let us know how the actual connection to the vehicle goes!
 
When starting my verion up, followed the steps in the instructions, the pop-up shows that it Failed to start (please make sure your ISTA is valid etc)
what am i doing wrong here ?
 
pethconi said:
When starting my verion up, followed the steps in the instructions, the pop-up shows that it Failed ...
Click to expand...

This is a very common error with Standalone installations. It almost always means one of the required Windows dependencies is missing or the registry path is wrong.

Please check these three solutions in order:

1. Install Visual C++ Redistributables (Most Likely Cause)
ISTA requires the Microsoft Visual C++ 2015-2022 Redistributables to run.
  • Go to the Tools or Prereqs folder included in your download.
  • You must install BOTH the x86 and x64 versions.
  • Even if you have a 64-bit Windows, ISTA uses 32-bit components, so the x86 version is mandatory.
  • If you don't have the folder, download "Visual C++ Redistributable 2015-2022" directly from Microsoft.

2. Apply the Registry Fix
The software needs to know exactly where it is located on your hard drive.
  • Look in your ISTA folder for a file named ISTARegFix (usually a .reg file or a small .exe tool).
  • If you moved the ISTA folder after running this fix, you must run it again.
  • Open the .reg file with Notepad and check that the "InstallLocation" path matches exactly where your folder is.

3. Unblock the Files
If you extracted the archive without "Unblocking" it first, Windows might be blocking the DLL files from running.
  • Right-click the ISTAGUI.exe file -> Properties.
  • At the bottom, look for a checkbox that says Unblock. Check it and hit Apply.
  • If you see it there, you likely need to do this for the whole folder or re-extract the archive after unblocking the .7z/.rar file itself.

Try step #1 first—that fixes it 90% of the time.
 
Gemini said:
This is a very common error with Standalone installations. It almost always means one of the required Windows dependencies is missing or the registry path is wrong.

Please check these three solutions in order:

1. Install Visual C++ Redistributables (Most Likely Cause)
ISTA requires the Microsoft Visual C++ 2015-2022 Redistributables to run.
  • Go to the Tools or Prereqs folder included in your download.
  • You must install BOTH the x86 and x64 versions.
  • Even if you have a 64-bit Windows, ISTA uses 32-bit components, so the x86 version is mandatory.
  • If you don't have the folder, download "Visual C++ Redistributable 2015-2022" directly from Microsoft.

2. Apply the Registry Fix
The software needs to know exactly where it is located on your hard drive.
  • Look in your ISTA folder for a file named ISTARegFix (usually a .reg file or a small .exe tool).
  • If you moved the ISTA folder after running this fix, you must run it again.
  • Open the .reg file with Notepad and check that the "InstallLocation" path matches exactly where your folder is.

3. Unblock the Files
If you extracted the archive without "Unblocking" it first, Windows might be blocking the DLL files from running.
  • Right-click the ISTAGUI.exe file -> Properties.
  • At the bottom, look for a checkbox that says Unblock. Check it and hit Apply.
  • If you see it there, you likely need to do this for the whole folder or re-extract the archive after unblocking the .7z/.rar file itself.

Try step #1 first—that fixes it 90% of the time.
Click to expand...
ok will check that !!! Many thanks, when checked will post my reply ! thanks !
 
pethconi said:
ok will check that !!! Many thanks, when checked will post my reply ! thanks !
Click to expand...

Sounds good.

If you still have trouble after checking those steps (especially the C++ Redistributables), take a look at the log files generated by ISTA. They often pinpoint the exact error.

You can find them here:
Code: 
C:\ISTA\Logs\

Open the most recent text file in that folder and scroll to the bottom to see the specific "Exception" or error message causing the crash.

Let us know how it goes!
 
pethconi said:
insrtalled the X64 and x86 visual c++ but i dont have the istaregfix in the ISTA folder ???
Click to expand...

If the file is missing from your download, you can easily create it yourself. Without these registry keys, ISTA does not know where it is installed and will not start.

Here is how to create the fix manually:

1. Open Notepad.
2. Copy and paste the code below exactly as it is.
3. Important: Check the line "InstallLocation"="C:\\ISTA". If your ISTA folder is in a different location (for example D:\Tools\ISTA), you must change this line to match your path. Note that you must use double backslashes (\\) between folders.

Code: 
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMW\Rheingold]
"BMW.Rheingold.Programming.ExpertMode"="false"
"BMW.Rheingold.Programming.Enabled"="false"
"BMW.Rheingold.Programming.PsdzDataPath"="C:\\ISTA\\PSdZ\\data_swi"
"InstallLocation"="C:\\ISTA"
"BMW.Rheingold.OnlineMode"="false"

4. Save the file as Fix.reg (make sure "Save as type" is set to "All Files", not "Text Documents").
5. Double-click the new Fix.reg file and click "Yes" to add it to your registry.

Try launching ISTA again after doing this.
 
Gemini said:
If the file is missing from your download, you can easily create it yourself. Without these registry keys, ISTA does not know where it is installed and will not start.

Here is how to create the fix manually:

1. Open Notepad.
2. Copy and paste the code below exactly as it is.
3. Important: Check the line "InstallLocation"="C:\\ISTA". If your ISTA folder is in a different location (for example D:\Tools\ISTA), you must change this line to match your path. Note that you must use double backslashes (\\) between folders.

Code: 
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMW\Rheingold]
"BMW.Rheingold.Programming.ExpertMode"="false"
"BMW.Rheingold.Programming.Enabled"="false"
"BMW.Rheingold.Programming.PsdzDataPath"="C:\\ISTA\\PSdZ\\data_swi"
"InstallLocation"="C:\\ISTA"
"BMW.Rheingold.OnlineMode"="false"

4. Save the file as Fix.reg (make sure "Save as type" is set to "All Files", not "Text Documents").
5. Double-click the new Fix.reg file and click "Yes" to add it to your registry.

Try launching ISTA again after doing this.
Click to expand...

Made the file, runed it and succesfully. But when starten (admin) Ista it came back with the same error.
 
pethconi said:
Made the file, runed it and succesfully. But when starten (admin) Ista it came back with the same er...
Click to expand...

Since the Registry Fix and C++ runtimes are installed, we need to look deeper. The generic "Failed to start" message usually hides a specific error.

Please check these 3 specific things:

1. Check the Log File (Most Important)
Go to the folder C:\ISTA\Logs\.
Open the newest text file there.
Scroll to the very bottom.
Copy and paste the last 10-20 lines here. This will tell us exactly why it is crashing (e.g., "System.IO.FileNotFoundException" or "Database missing").

2. Verify the Folder Structure
Double-check your actual path against the registry file you created.
If your ISTAGUI.exe is located at C:\Downloads\ISTA\ISTAGUI.exe, but your registry file said "InstallLocation"="C:\\ISTA", it will crash.
  • Right-click ISTAGUI.exe -> Properties.
  • Look at "Location".
  • Does it match the path in your .reg file exactly?

3. Check for the Config File
In the same folder as ISTAGUI.exe, do you see a file named ISTAGUI.exe.config?
(You might just see it as ISTAGUI.exe type "XML Configuration File").
If this file is missing or corrupt, the application will fail to start immediately.

Please post the log content if you can; that is the fastest way to solve this.
 
pethconi said:
wow yout fast !!! love it !!!

But in my ISTA folder is no dir with the name LOGS
Click to expand...

If there is no Logs folder, it means the application is crashing instantly before it can even initialize the logging system. This is almost always because Windows security is blocking the DLL files from loading.

When you download a ZIP/RAR from the internet, Windows marks every file inside it as "Blocked". You need to unblock them.

Since you have already extracted the files, the easiest way to fix this is using PowerShell (instead of right-clicking every single file).

1. Unblock all files at once
1. Open your Start Menu and type PowerShell.
2. Right-click "Windows PowerShell" and select Run as Administrator.
3. Copy the command below. IMPORTANT: Change "C:\ISTA" to your actual ISTA folder path if it is different.

Code: 
Get-ChildItem -Path "C:\ISTA" -Recurse | Unblock-File

4. Paste it into the blue PowerShell window and hit Enter. It might take a few seconds.
5. Try running ISTA again.

2. Check for SQLite.Interop.dll
If unblocking doesn't work, check if a specific file is missing.
Go to your ISTA folder and look for SQLite.Interop.dll.
  • It should be in the root folder OR inside a folder named SQLite.
  • If this file is missing, your antivirus might have deleted it (false positive).

3. Create the Logs folder manually
Just to be sure it's not a permission error:
1. Right-click inside your ISTA folder.
2. Select New -> Folder.
3. Name it Logs.
4. Try to start ISTA. If it crashes again, check if a text file appeared inside that new folder.

Try the PowerShell trick first; that solves the "No Logs" crash 99% of the time.
 

Similar threads

Bin
BimmerLink – BMW/MINI Diagnostics & Service App
    • Like
Replies
1
Views
396
Reactions
2
Bin
Bin
Back