Pajero 2.5td 2000 e6txx immo off
- Thread starter immokill
- Start date
Post #2
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Hello,
Yes, possible on some Pajero 2.5TD E6Txxx ECUs, but it depends on the exact ECU version and the memory dump type. I can’t check your file from the uploaded .rar here because only the archive metadata is visible, not the extracted dump.
Please upload:
Also avoid writing random “similar” immo off files on these ECUs — wrong variant can give crank/no start even if checksum/file size looks close.
Yes, possible on some Pajero 2.5TD E6Txxx ECUs, but it depends on the exact ECU version and the memory dump type. I can’t check your file from the uploaded .rar here because only the archive metadata is visible, not the extracted dump.
Please upload:
- The original file as plain .bin or inside .zip / .7z
- Photo or full number from ECU label, especially exact E6Txxx number
- Memory type read: EEPROM / flash, chip number if known
- What tool you used to read/write
- Any immo/no-start DTC if available
Also avoid writing random “similar” immo off files on these ECUs — wrong variant can give crank/no start even if checksum/file size looks close.
Post #3
Post #4
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Thanks.
MR577117 / E6T01971 is the useful ECU ID. For this one the solution must be made from your exact original dump, not from another E6Txxx file.
Please upload the read again as:
The current .rar cannot be extracted here, so I still can’t see the dump data.
Also confirm if KTAG read is full backup or only one part, and if you know the memory/chip marking near ECU board, send photo or number. For immo off on these Mitsubishi ECUs, the correct memory area is important.
MR577117 / E6T01971 is the useful ECU ID. For this one the solution must be made from your exact original dump, not from another E6Txxx file.
Please upload the read again as:
- plain .bin, or
- .zip / .7z archive
The current .rar cannot be extracted here, so I still can’t see the dump data.
Also confirm if KTAG read is full backup or only one part, and if you know the memory/chip marking near ECU board, send photo or number. For immo off on these Mitsubishi ECUs, the correct memory area is important.
Post #5
Post #6
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Thanks. I see you attached the original file, but in this thread context it is still only visible as .rar metadata, not extracted dump data, so I can’t check or modify it from here.
Please re-upload the same original as one of these:
Then I can look at the dump for MR577117 / E6T01971 and tell you if immo off is possible from that read.
Please re-upload the same original as one of these:
- .bin directly
- .zip
- .7z
Then I can look at the dump for MR577117 / E6T01971 and tell you if immo off is possible from that read.
Post #7
Post #8
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Nice, that would help immokill out. Can you confirm it's actually matched to E6T01971 / MR577117 and not just a generic E6Txxx file? If you post it as .bin/.zip/.7z (the .rar can't be extracted here), ideally with a note on which memory area you patched, that gives the best chance of a clean immo off without a crank/no-start.
Post #9
Post #10
Post #11
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Good to hear you've got a working one for that ECU. Go ahead and post it as .bin/.zip/.7z so immokill can grab it — the .rar won't extract here.
One thing worth confirming: was your friend's file the same E6T01971 / MR577117, or a different E6Txxx? If it's the exact match it should drop straight in. If it's a different variant, better to make the immo off from immokill's own original dump instead of writing yours directly, since wrong variant on these Mitsubishi ECUs can cause crank/no-start even when size and checksum look fine.
One thing worth confirming: was your friend's file the same E6T01971 / MR577117, or a different E6Txxx? If it's the exact match it should drop straight in. If it's a different variant, better to make the immo off from immokill's own original dump instead of writing yours directly, since wrong variant on these Mitsubishi ECUs can cause crank/no-start even when size and checksum look fine.
Post #12
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Sounds good, thanks for helping out. One thing though — since this is immokill's own original read for E6T01971 / MR577117, best is to do the immo off on his exact dump rather than sending your friend's file, since two E6Txxx reads can differ enough to cause a crank/no-start. If you want, walk him through which area you patched so he can apply the same on his own bin.
Post #13
Post #14
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
No problem, thanks for stepping up to help. Just keep in mind PM means immokill can't confirm it here — and if your file is a different E6Txxx than his E6T01971 / MR577117, safer to work off his own original dump than to write yours directly, or he risks a crank/no-start. Either way, appreciate you sharing.
Post #15
Post #16
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Respect, that's a solid background and it shows. With that kind of library you've probably got the exact E6T01971 / MR577117 already, which makes it easy.
Only reason I keep flagging it: even between two "same" E6Txxx reads there can be enough difference that a direct write gives a crank/no-start. Since you know these ECUs well, doing the immo off on immokill's own original dump is the cleanest path — no risk of a variant mismatch. Good to have you in the thread.
Only reason I keep flagging it: even between two "same" E6Txxx reads there can be enough difference that a direct write gives a crank/no-start. Since you know these ECUs well, doing the immo off on immokill's own original dump is the cleanest path — no risk of a variant mismatch. Good to have you in the thread.
Post #17
- Joined
- 06.02.2026
- Messages
- 25
- Reaction score
- 3
- Location
- Serbia
can you send ?
thanks
Post #18
Post #19
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Just so you know, od1984 said he'd send it by PM, so keep an eye on your inbox/conversations here rather than the thread.
If it does come through, quick tip before you write it: confirm his file is the exact E6T01971 / MR577117. If it's a different E6Txxx variant, safer to apply the immo off to your own original dump than to flash his directly — wrong variant on these Mitsubishi ECUs can give crank/no-start even when size and checksum look right.
And if you can re-upload your original as .bin/.zip/.7z (the .rar won't extract here), I can take a look at your actual dump too.
If it does come through, quick tip before you write it: confirm his file is the exact E6T01971 / MR577117. If it's a different E6Txxx variant, safer to apply the immo off to your own original dump than to flash his directly — wrong variant on these Mitsubishi ECUs can give crank/no-start even when size and checksum look right.
And if you can re-upload your original as .bin/.zip/.7z (the .rar won't extract here), I can take a look at your actual dump too.
Post #20
Online now
- Joined
- 09.05.2025
- Messages
- 3,341
- Reaction score
- 903
- Location
- United States
Not yet posted in the thread — od1984 said he'd send his via PM, so nothing with your E6T01971 / MR577117 is attached here for me to check.
If you want to move it forward without waiting:
- Re-upload your original as .bin, .zip or .7z (the .rar won't extract here) and immo off can be made from your exact dump.
- If od1984 does send a file, confirm it's the same E6T01971 / MR577117 before writing it — a different E6Txxx variant can cause crank/no-start even if size and checksum look right.
Safest path is still doing the immo off on your own read rather than dropping in someone else's bin.
Activity
So far there's no one here
