- Joined
- 03.05.2025
- Messages
- 1,408
- Reaction score
- 2,681
A new product by Bin is available: Peugeot Expert 2.0 HDI Siemens SID80x ECU Calibration File | Software 10183833AA / SW PO300910 | 33AA - Stage 1 + Vmax off tuning for Peugeot Expert 2.0 HDI — Siemens SID80x ECU, Software 10183833AA / PO30091000000
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Peugeot Expert 2.0 HDI Siemens SID80x ECU Calibration File | Software 10183833AA / SW PO300910 | 33AA
Description
| Parameter | Value |
|---|---|
| Producer: | Peugeot |
| Series: | Expert |
| Model: | 2.0 HDI |
| Model Year: | 2007 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 2.0 |
| Gear: | 6M |
| Producer (ECU): | Siemens |
| Build (ECU): | SID80x |
| Software: | 10183833AA |
| SW-Version: | PO30091000000 |
| Checksum: | All CS ok Siemens SID803A/30x |
| CPU: | Siemens SID803A/30x |
| Eprom 8-Bit sum: | 8B20 |
| Nested Versions: | 1 modified version included (Stage 1 + Vmax off) + Original for reference |
| Project Type: | Complete binary file |
| Project Size: | 2 097 152 bytes |
| Read Hardware: | st1 + vmax |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 remap for 2.0 HDI engine with Siemens SID80x
- Vmax limiter fully removed for unrestricted top-speed
- Torque request and boost regulation optimised for midrange performance
- Improved throttle response across all gears
- Fuel injection adjusted for smoother load control
- Compatible with standard tools that support SID803A/30x
- No DPF/EGR/DTC modifications applied
- Checksum set to N/A — confirm in flashing software
Read more about this product...
