- Joined
- 03.05.2025
- Messages
- 1,408
- Reaction score
- 2,681
A new product by Bin is available: Renault Megane 2 1.5 DCI SID301 Calibration File – SW-Version RM110D0000000 8201128997 - Stage 1 tuning for Megane 2 1.5 DCI — smoother torque curve and refined economy without hardware mods
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Renault Megane 2 1.5 DCI SID301 Calibration File – SW-Version RM110D0000000 8201128997
Description
| Parameter | Value |
|---|---|
| Producer: | Renault |
| Series: | Megane 2 |
| Model: | 1.5 DCI |
| Model Year: | 2008 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 1.5 |
| Output: | 105.0PS / 77.2KW |
| Gear: | 5M |
| Producer (ECU): | Siemens |
| Build (ECU): | SID301 |
| ECU-Nr. Prod: | 8201128997 |
| Software: | RM110D0000000 |
| SW-Version: | RM110D0000000 |
| Checksum: | All CS ok Siemens SID803A/30x |
| CPU: | Siemens SID803A/30x |
| Eprom 8-Bit sum: | 25B1 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Details: | st1 |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 ECU calibration for 1.5 DCI Megane 2 with Siemens SID301
- Low-end torque optimisation and smoother load transitions
- Injection timing recalibrated for clean combustion and better fuel efficiency
- No hardware modifications required — safe for stock exhaust and turbo
- Maintains factory cold-start logic and idle control
- No changes made to EGR or DPF systems
- Checksum status: N/A
- Supplied as complete binary (2 097 152 bytes) with original backup
- Ready to flash via tools supporting SID301
- Built for road-use torque boost with OEM reliability
Read more about this product...
