The software works via the sеriаl port of the PC, which unfortunately most PCs no longer have. An RS232 to USB converter can help.
The software is easy to use:
The software is easy to use:
- Connect RS232 to USB converter with PC and RNS510 also connect the RNS510 to a power source.
- Switch on the RNS510, wait until the input mask for the code appears, then wait approx. 2 minutes.
- Start SW, select COM port, set value range if necessary and click start button.
- The SW now tries all possible pins in the value range. If the pin has been found, it will be displayed and a message box will appear.
Last edited:
