Post #1
- Joined
- 02.02.2026
- Messages
- 54
- Reactions
- 61
- Location
- Ireland
The software works via the serial port of the PC, which unfortunately most PCs no longer have. An RS232 to USB converter can help.
The software is easy to use:
The software is easy to use:
- Connect RS232 to USB converter with PC and RNS510 also connect the RNS510 to a power source.
- Switch on the RNS510, wait until the input mask for the code appears, then wait approx. 2 minutes.
- Start SW, select COM port, set value range if necessary and click start button.
- The SW now tries all possible pins in the value range. If the pin has been found, it will be displayed and a message box will appear.
Last edited:
