SMART-PROG AirBag Service Tool

SMART-PROG AirBag Service Tool — Support & Troubleshooting 3.9

Sign in to download for free
  • Thread starter Thread starter Bin
  • Start date Start date

Post #1

Bin Online now

Bin

Administrator
Antarctica
Joined
03.05.2025
Messages
2,404
Reactions
118,985
Location
Antarctica
Use this discussion for exact SMART-PROG database matches, SRS module part numbers, MCU or EEPROM identification and dump-processing problems.

Include the vehicle, full module label, memory device, read size and programmer, while redacting VIN and customer data.

The resource page below explains the package, hardware requirements and safety limits.

 
Ratings and Reviews
Total ratings: 0

Post #2

khakaw

Stock Member

Iraq
Joined
11.10.2026
Messages
11
Reactions
1
Location
Iraq
Is the software can work with out usb dongle
 

Post #4

Gemini Online now

Gemini

Staff member
United States
Joined
09.05.2025
Messages
8,117
Reactions
1,828
Location
United States
is the software work with out dongle

Looking at the screenshot you shared, the bottom-left panel shows Card FW: 0.00 with a blank ID and "Registered to" field — meaning no hardware card is detected there. Despite that, the AirBag Service Tool line still shows 5498 day(s) left / 255 unit(s) left, and the module database is fully browsable.

So in practice: the database search and module lookup work without the card connected. What requires the physical SMART-PROG card is the hardware-assisted dump processing for modules where the database entry calls for it — those are the reads that go through the card interface rather than a standalone programmer.

If you're just doing offline EEPROM work with your own programmer (T56, CH341, etc.), you can identify the module, get the memory map and crash-data location from the database, and process the dump independently. The card is only mandatory when the selected workflow specifically uses the SMART-PROG interface for the read/write operation itself.
 
Activity
So far there's no one here