- Joined
- 03.05.2025
- Messages
- 1,407
- Reaction score
- 2,641
A new product by Bin is available: Supra 3.0T B58B30M1 — MG1CS201 R4C9H6B5BKLZX4 Bosch — ECU Files R4C9H6 - Toyota / BMW Stage 2 — SW: R4C9H6B5BKLZX4 — An aggressive tune for the B58 engine, calibrated for a high-flow downpipe to deliver ~434Hp & 600Nm.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Supra 3.0T B58B30M1 — MG1CS201 R4C9H6B5BKLZX4 Bosch — ECU Files R4C9H6
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer: | Toyota / BMW |
| Series: | Supra |
| Model: | 3.0T 340hp |
| Modelyear: | 2019 |
| Motorcode: | B58B30M1 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 2.998 L |
| Output: | 339.9 PS / 250.0 kW |
| Gear: | DCT |
| Use: | Engine |
| Producer (ECU): | Bosch |
| Build (ECU): | MG1CS201 |
| ECU-Nr. Prod.: | DME8.6T-0-B58-S15A-J29-B58B30M1-RWD---RECE-EU6d-TEMP-OPF-PVL________________________________________#R4C9H6B5BKLZX4 |
| ECU-Nr. ECU: | R4C2H695B |
| Software: | R4C9H6B5BKLZX4 |
| SW-Version: | R4C9H6B5B |
| Checksum: | N/A |
| 8-Bit sum: | 7F0C |
| Versions: | 1 modified version included (Stage 2) + Original for reference |
| Calibrated by: | Dyno Chiptuningfiles,nicky,RP PC |
| Project type (Project): | Complete binary file |
| Read Hardware: | Autotuner OBD |
| Project state: | in development |
| Project type (Reseller): | Tuningfile |
| Details: | Stage 2 (434Hp & 600Nm) |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Calibrated for a target output of ~434Hp and 600Nm.
- Requires a high-flow or decat downpipe for correct operation.
- Aggressive boost, fuel, and ignition maps for maximum performance.
- Transmission torque limiters adjusted to handle the increased power.
- Catalyst monitoring disabled in software for decat pipes (for off-road use).
- All engine safety systems retained and recalibrated for high-performance use.
Read more about this product...
