- Joined
- 03.05.2025
- Messages
- 1,408
- Reaction score
- 2,679
A new product by Bin is available: VW Crafter 2.0 TDI CR DAVA ECU Calibration File – FC03CAKBGS04_X827 / SW 6398 (DCM6.2) 6398 - Stage 1 remap for VW Crafter DAVA with 04L906056EH & Delphi DCM6.2 (FC03CAKBGS04_X827)
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
VW Crafter 2.0 TDI CR DAVA ECU Calibration File – FC03CAKBGS04_X827 / SW 6398 (DCM6.2) 6398
Description
| Parameter | Value |
|---|---|
| Producer: | VW |
| Series: | Crafter |
| Model: | 2.0 TDI CR |
| Model Year: | 2019 |
| Name Engine: | DAVA |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 2.0 |
| Output: | 177.0PS / 130.2kW |
| Gear: | Automatic transmission |
| Producer (ECU): | Delphi |
| Build (ECU): | DCM6.2 |
| ECU-Nr. Prod: | 04L906056EH |
| Software: | FC03CAKBGS04_X827 |
| SW-Version: | 6398 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | ACC9 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Details: | st1 |
| Project Type: | Complete binary file |
| Project Size: | 4 194 304 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 ECU file for VW Crafter 2.0 TDI CR DAVA with Delphi DCM6.2
- Torque model and injection limiters recalibrated for stronger mid-range
- Boost control strategy adjusted for faster spool and less lag
- Cold-start and idle logic left unmodified for smooth daily use
- No changes to DPF, EGR or SCR systems — emissions components remain active
- Includes original and tuned binary for recovery or reference
- Read/write tested via CMD Flash (bench or OBD)
- Optimised for use in utility/delivery and commercial vehicle scenarios
Read more about this product...
