- Joined
- 03.05.2025
- Messages
- 1,786
- Reaction score
- 21,971
New Tuning File Available: VW Golf 7 GTI 2.0 TSI CHHA SIMOS18 ECU File | Software SC800F8400000/SW 0007 | 5G0906259 - Stage 2 with Pop&Bangs and Start/Stop delete for Golf 7 GTI CHHA 2.0 TSI – ECU SIMOS18 5G0906259, tuned for aggressive response and enhanced feedback
Welcome to the official discussion thread for the VW 2.0 TSI tuning package. This calibration is specifically developed for the SIMOS18 ECU and optimized to work seamlessly with the 6M.
Target Performance: 230.0PS / 169.2KW.
Share your experience!
Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
âžś Download Tuning File / View Full Specs
Discussion & Reviews: VW 2.0 TSI
Welcome to the official discussion thread for the VW 2.0 TSI tuning package. This calibration is specifically developed for the SIMOS18 ECU and optimized to work seamlessly with the 6M.
Target Performance: 230.0PS / 169.2KW.
Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 2 remap for Golf 7 GTI CHHA 2.0 TSI with 6-speed manual
- Pop&Bangs enabled in Sport/Sport+ modes only
- Start/Stop system fully disabled – no auto-shut at idle
- Boost and load targets raised for enhanced top-end output
- Ignition timing and AFR adjusted for aggressive throttle control
- Launch control logic revised for quicker off-the-line pull
- Torque intervention maps recalibrated for stronger pull
- SIMOS18 ECU – Software SC800F8400000 / SW 0007
- Read/write via CMD Flash tools
- Delivered as full binary with original and modified files
âžś Download Tuning File / View Full Specs