Porsche Cayenne V6 3.6L — MED9.1.4 387734 Bosch — Calibration File

[Bin]

A new product by Bin is available: Cayenne V6 3.6L — MED9.1.4 387734 Bosch — Calibration File 03H906032M - Porsche Stage 1 — ECU: 03H906032M / SW: 387734 — A refined tune for the V6 engine, designed to sharpen throttle response and smooth the powerband for a better drive.

Cayenne V6 3.6L — MED9.1.4 387734 Bosch — Calibration File 03H906032M​

Description​

Parameter	Value
Producer:	Porsche
Series:	Cayenne
Model:	v6
Model Year:	2009
Type (Engine):	Naturally Aspirated Petrol
Displacement:	3.6 L
Output:	290 PS / 213.3 kW
Gear:	automatic
ECU Maker:	Bosch
ECU Build:	MED9.1.4
ECU-Nr. Prod.:	6DE4AASN100
ECU-Nr. ECU:	03H906032M
Software:	387734
SW-Version:	0304
Checksum:	N/A
CPU:	Freescale PowerPC
8-Bit sum:	EE57
Nested Versions:	1 modified version included (Stage 1) + Original for reference
Project type (Project):	Complete binary file
Details:	Stage_1
Project Size:	2 097 152 bytes

All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.

Extended Product Information​

• Improved throttle mapping for a more direct and responsive pedal feel
• Optimized ignition timing for increased torque throughout the RPM range
• Air-fuel ratio (lambda) targets adjusted for improved power and efficiency
• Torque model adjusted for the automatic transmission to provide smoother, more decisive shifts
• All factory engine safety systems remain fully active

Read more about this product...

 

[Fapnet]

Hello, what is the final power of the vehicle after reprogramming please?

 

[Bin]

Hello, what is the final power of the vehicle after reprogramming please?

Hello, unfortunately they did not specify this in the description of the project in EVC Resseler, which indicates that it was a remote setting for the client, I found from them a setting for this engine +25hp +30nm

For any purchased firmware, the recalculation of the CS amount is available free of charge, the original WinOLS version 5.

 

[Bin]

No damos, so original open bin file and stage 1 for comparison, the top window is the original, it will be a fuel filling

 

[Fapnet]

Okay, I just made a payment in USDC on the base network to purchase the file.
The withdrawal went through successfully on my end, but when I validate the payment here, it says "Oops! We ran into some problems."
Waiting for payment.
Can you please resolve this issue?

 

[Bin]

Okay, I just made a payment in USDC on the base network to purchase the file.
The withdrawal went through successfully on my end, but when I validate the payment here, it says "Oops! We ran into some problems."
Waiting for payment.
Can you please resolve this issue?

One moment

 

[Fapnet]

It's okay, I managed to download the files.
Thank you for your patience and professionalism.