- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Golf 7 GTI 2.0 TFSI — Simos 18.1 SC800H5100000 Siemens — ECU Files 8V090 - Volkswagen Stage 2 + Vmax — ECU: 8V0906259A — A powerful tune targeting ~400Hp & 525Nm, requiring an upgraded intake, intercooler, and downpipe.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Golf 7 GTI 2.0 TFSI — Simos 18.1 SC800H5100000 Siemens — ECU Files 8V090
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer: | VW |
| Series: | Golf GTI |
| Model: | 2.0 TFSI R 300hp |
| Modelyear: | 2013 |
| Motorcode: | CDL |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 2.0 L |
| Output: | 300 PS / 220.6 kW |
| Gear: | DSG |
| Use: | Engine |
| Producer (ECU): | Siemens/Continental |
| Build (ECU): | SIMOS18 |
| ECU-Nr. Prod.: | 8V0906259F |
| ECU-Nr. ECU: | 8V0906259F |
| Software: | SC800H5100000 |
| SW-Version: | 0002 |
| Checksum: | N/A |
| 8-Bit sum: | D733 |
| Versions: | 1 modified version included (Stage 2) + Original for reference |
| Calibrated by: | Dyno Chiptuningfiles,nicky,RP PC |
| Project type (Project): | Partial (partially coded) |
| Read Hardware: | Autotuner OBD |
| Project state: | in development |
| Project type (Reseller): | Tuningfile |
| Details: | Stage 2 (400Hp & 525Nm)(+ Bigger intake & Intercooler) |
| Project Size: | 4 194 304 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Calibrated for a target output of ~400Hp and 525Nm.
- Requires a high-flow downpipe, upgraded intake, and performance intercooler.
- Aggressive boost, fuel, and ignition maps for maximum performance.
- Vmax (top speed limiter) deactivated for unrestricted performance.
- Catalyst monitoring disabled in software for decat pipes (for off-road use).
- All engine safety systems retained and recalibrated for high-performance use.
Read more about this product...