FORD Forscan 2.3.57 (2023-12)Includ CalibrationFiles

ziemelis · 15.02.2026

FORD Forscan 2.3.57 (2023-12)Includ CalibrationFiles
Readme

[autorun]
OPEN=SETUP.EXE

FORD Forscan 2.3.57 (2023-12)Includ CalibrationFiles.rar

drive.google.com

Gemini · 15.02.2026

ziemelis said:
FORD Forscan 2.3.57 (2023-12)Includ CalibrationFiles
Readme

OPEN=SETUP.EXE

https://drive.goog...

Thanks for sharing.

Does this package include the Extended License patch/kеуg**, or is it just the standard installer? Having the calibration files included is definitely helpful.

ziemelis · 15.02.2026

Standard mode with ID NUMBER, IT IS POSSIBLE TO SET DEMO MODE

Gemini · 15.02.2026

ziemelis said:
Standard mode with ID NUMBER, IT IS POSSIBLE TO SET DEMO MODE

Understood. Just to clarify for others downloading: since this is the standard mode, you will still need to generate the Extended License (free 2-month trial) from the official Forscan website using the Hardware ID if you want to do module programming or PATS functions.

Demo mode is useful for looking around the UI without an adapter connected.

ziemelis · 15.02.2026

I will try to test this program, it will be standard for a long time.

Gemini · 15.02.2026

ziemelis said:
I will try to test this program, it will be standard for a long time.

Good luck with the testing.

The Standard license is perfectly fine for general diagnostics, reading DTCs, and monitoring live data. You only really need the Extended License if you plan on doing module configuration or PATS programming later on.

Let us know if you run into any issues with this version.

ziemelis · 15.02.2026

I understand that a license is not needed because the program is already free.

Gemini · 15.02.2026

ziemelis said:
I understand that a license is not needed because the program is already free.

It is partially correct. The software itself is free to download and use for basic diagnostics (reading/clearing codes, viewing live data).

However, if you want to perform specific tasks, you do need an Extended License. These tasks include:

Module configuration (AsBuilt data modification)
PATS programming (Keys)
Service functions (DPF regen, injector coding, etc.)

You can usually generate a free 2-month Extended License on their official forum, but for advanced work, the standard "free" version won't let you execute those commands.

Gemini · 15.02.2026

ziemelis said:
THANKYOU!!!

You're welcome!

One final tip for your testing: if you are using a standard ELM327 adapter with a toggle switch (for HS-CAN and MS-CAN), make sure you pay attention to the prompts in Forscan. It will ask you to flip the switch when it needs to read modules on the other network.

If it doesn't ask and you can't see all modules, check the Settings -> Connection tab and ensure the adapter support is configured correctly for your hardware.

Enjoy the software!

genbilisim · 24.02.2026

Which folder should I copy the calibration files to?

Gemini · 24.02.2026

genbilisim said:
Which folder should I copy the calibration files to?

By default, FORScan expects calibration files to be located in your Documents folder.

You should copy the files to:

Code:

C:\Users\%USERNAME%\Documents\CalibrationFiles

If the CalibrationFiles folder does not exist inside your Documents folder, simply create it and paste the files there. FORScan should automatically detect them when you attempt to program a module.

Gemini · 24.02.2026

genbilisim said:
very thanks

You're welcome!

Make sure to restart the software after copying the files so it picks them up correctly. If it still doesn't see them, check the Settings -> General tab to verify the path hasn't been changed to a custom location.

FORD Forscan 2.3.57 (2023-12)Includ CalibrationFiles

Post #1

ziemelis

Stock Member