Post #61
Gimme the pass pls
Davinci Deluxe DTC EGR DPF - ECU Patch Utility Software 1.0.37
- Thread starter Bin
- Start date
-
- Tags
- vin dtc-off ecu-remapping davinci
Post #62
- Joined
- 26.01.2026
- Messages
- 12
- Reactions
- 1
- Location
- Bosnia & Herzegovina
what is it i cant find it?
Post #63
- Joined
- 03.05.2026
- Messages
- 6
- Reactions
- 1
- Location
- Germany
Does anyone know which DaVinci version is compatible with the Delphi DCM6.2V 04L906056SJ (SPC5674)? This control unit was installed in the MAN TGE (2021) and VW Crafter 2 (2021).
tested only!
Thank you and best wishes.
tested only!
Thank you and best wishes.
Post #64
- Joined
- 18.05.2026
- Messages
- 5
- Reactions
- 0
- Location
- Bosnia & Herzegovina
How download
Post #65
- Joined
- 05.06.2026
- Messages
- 1
- Reactions
- 0
- Location
- Türkiye
PerfectDavinci Deluxe - New version thread for the ultimate DPF, EGR, Adblue, and DTC removal tool: discuss, share feedback, and get help.
Davinci Deluxe - The Ultimate DPF, EGR, Adblue, and DTC Removal Tool
Powerful Davinci Deluxe software for automatically removing DPF, EGR, Adblue, Flaps, and DTCs
Frequently Asked Questions
Which Windows version is recommended?
A clean installation of Windows 10 (64-bit) is recommended for maximum stability during ECU flashing and diagnostic operations.
Is it compatible with J2534 PassThru?
Most modern software versions support standard J2534 interfaces such as Scanmatik 2 Pro, OpenPort 2.0, and certain VCI adapters.
Contents:
- Overview and Screenshots
- Version history and compatibility
- Download link and installation notes
View all details and download — Davinci Deluxe - The Ultimate DPF, EGR, Adblue, and DTC Removal Tool
Post #66
- Joined
- 18.05.2026
- Messages
- 5
- Reactions
- 0
- Location
- Bosnia & Herzegovina
Hello
Is there a cracked version of the AutoTuner program anywhere?
Is there a cracked version of the AutoTuner program anywhere?
Post #67
zitoune123
Suspended
- Joined
- 11.06.2026
- Messages
- 3
- Reactions
- 0
Thx is no good for Renault Scenic 2018 egr and adblue off no no no goodNew release thread for Davinci Deluxe - The Ultimate DPF, EGR, Adblue & DTC Removal Tool: discuss, share feedback, and get help.
Davinci Deluxe - The Ultimate DPF, EGR, Adblue & DTC Removal Tool
The powerful Davinci Deluxe software for automatically removing DPF, EGR, Adblue, Flaps, and DTCs
Frequently Asked Questions
Which Windows version is recommended?
For maximum stability during ECU flashing and diagnostics, a clean installation of Windows 10 (64-bit) is recommended.
Is it compatible with J2534 PassThru?
Most modern software versions support standard J2534 interfaces like Scanmatik 2 Pro, OpenPort 2.0, and specific VCI adapters.
What's inside:
- Overview & screenshots
- Version history and compatibility
- Download link and setup notes
is 10.35 thanx to doPost #68
Post #69
- Joined
- 03.05.2026
- Messages
- 6
- Reactions
- 1
- Location
- Germany
Hi, looking for help with Delphi DCM6.2V VAG, SW 04L 906 056 SJ (MAN TGE 2021, 177PS DAVA, HW H01).
Need AdBlue OFF + EGR OFF — complete firmware removal, not DTC off. I have the original BIN (real read via KT200II bench, not VR) and can write it back myself.
A manually created solution would be preferred if possible — there seem to be some issues with automated patches on this SW version.
A few questions for whoever can help:
Does the AdBlue pump need to be physically disconnected after flashing?
EGR valve — blank off required or firmware only?
Should I reset SCR/NOX adaptations with VCDS before writing?
Any drive cycle or relearn needed afterwards?
Need AdBlue OFF + EGR OFF — complete firmware removal, not DTC off. I have the original BIN (real read via KT200II bench, not VR) and can write it back myself.
A manually created solution would be preferred if possible — there seem to be some issues with automated patches on this SW version.
A few questions for whoever can help:
Does the AdBlue pump need to be physically disconnected after flashing?
EGR valve — blank off required or firmware only?
Should I reset SCR/NOX adaptations with VCDS before writing?
Any drive cycle or relearn needed afterwards?
Post #70
- Joined
- 18.05.2026
- Messages
- 5
- Reactions
- 0
- Location
- Bosnia & Herzegovina
Multimedia Columbus RNS510, where can I find firmware to download so I can put it on a CD and reinstall it?
Post #71
Post #72
Post #73
Post #74
binunlock.com
Post #75
- Joined
- 19.07.2026
- Messages
- 5
- Reactions
- 0
- Location
- China
I hope that
Post #76
Post #77
Online now
- Joined
- 09.05.2025
- Messages
- 7,721
- Reactions
- 1,769
- Location
- United States
Post #78
Post #79
Post #80
Activity
So far there's no one here
