Ford IDS + FDRS - Complete Dealer Diagnostic Package Full Patched 132.04

Ford Diagnostic Software Collection​

This package includes multiple versions of Ford diagnostic software, including IDS, FJDS, and FDRS, along with available раtсh releases.

Included versions:

• IDS 130 / 131 / 132
• FJDS 130 / 131 / 132
• FDRS 45.x / 46.x
• раtсh 1.1.3.1
• раtсh 1.1.3.6

Suitable for users who need access to different releases for compatibility, testing, or workshop use.

Update contents & highlights​#

• Main installer: IDS-132.03.exe
• Additional base: IDS-132.01_full.exe
• Dealer tools: FDRS_45.6.5.exe
• VCI drivers: VCI_Software_1.0.1.18.exe
• Activation tool: IDS-Activation.exe
• Guide: README.txt with step-by-step instructions

What’s new vs 132.01​#

• Updated ECU/vehicle coverage through late-2025 models
• Stability fixes for session start, DTC read, and programming prep
• Improved VCI detection and DoIP handling

Quick install flow​#

1. Install VCI_Software_1.0.1.18.exe
2. Run IDS-132.01_full.exe, then update with IDS-132.03.exe
3. Apply IDS-Activation.exe and reboot
4. Optionally install FDRS_45.6.5.exe for newer platforms
5. Launch IDS, pair VCI, confirm communication

Notice​#

Source of Files: All materials are collected from publicly accessible sources on the internet.​

File Hosting: This forum does not host files; any links point to third-party cloud services.​

User Responsibility: Provided for educational and evaluation purposes only. You are responsible for usage and outcomes.​

What’s new in Ford IDS 132.02

• Improved compatibility with VCM II/VCM3 and selected J2534 pass-thru devices (per OEM support).
• Refinements to PMI and module programming workflows with clearer status prompts.
• Updated vehicle coverage and service information included with the 132.02 data set.
• Stability fixes, faster launch, and better handling of offline sessions.

About this release
This package is intended for professional diagnostics and service on Ford/Lincoln (and supported legacy Mazda platforms where applicable). It supports DTC read/clear, live data, self-tests, resets, service functions, PMI, and report export. For newer platforms that require FDRS, follow OEM guidance.

Compatibility

• Interfaces: VCM II / VCM3; selected J2534 pass-thru devices as supported by IDS.
• OS: Windows 7 / 8.1 / 10 / 11 (64-bit). Tested on Windows 10 LTSC (2019).
• Hardware: 4-core CPU or better, 8 GB RAM minimum (16 GB recommended), 40+ GB free disk space.

Install / Update notes

1. Back up previous IDS logs/reports and any custom interface drivers.
2. Remove older IDS builds if required, then install 132.02 and the included data/calibrations.
3. Reboot after installation and confirm VCI/J2534 communication in System Utilities ▸ Test.
4. If security software flags components, whitelist the installation folder and retry.

Good practice

• Use a regulated power supply during any programming session.
• Verify vehicle coverage in the release notes before attempting PMI or configuration.
• Observe OEM licensing terms for online functions and updates.

---

Disclaimer: This summary is compiled from publicly available information and provided for educational/informational use only. Any files referenced are user-submitted and may be hosted by third parties; forum staff does not verify ownership or licensing. Use Ford software strictly within applicable laws and the rights holder’s terms.