TMPro (Transponder Maker Pro) is a module based workshop utility used by automotive locksmiths and electronics specialists to work with immobilizer data and supported control units. It focuses on transponder preparation workflows based on module type, and it can assist with identifying common immobilizer units like immobox, BSI, UCH, EWS, and TWICE.


This type of software is intended for legitimate service tasks like spare key work, lost key recovery with proof of ownership, and module replacement support. Always follow local laws and OEM procedures.

Summary Highlights

• Module selector for many immobilizer and ECU families across multiple brands
• Guided workflow based on selected module and loaded data file
• Helps identify typical memory device parameters and expected data size per module
• Provides transponder preparation guidance depending on module capabilities
• Shows status messages and hardware connection state in the main interface
• Results and supported functions depend on the selected module and control unit generation

Package contents

• TMPro (Transponder Maker Pro) application build (file names can differ by release packaging)

Compatibility notes

• Requires supported hardware interface for full operation, the software may show a hardware not found status when the interface is not connected
• Supported module behavior differs by immobilizer generation, ECU type, and memory layout
• Always confirm the exact module family, part number, and vehicle system before performing any write operations
• Availability varies by vehicle and firmware

Supported modules included in this build

• 1. Fiat, Lancia, Citroen, Peugeot immobox Delphi, transponder maker
• 2. Fiat, Lancia IMMO1 CI immobox Marelli, transponder maker
• 3. Fiat, Lancia IMMO1 OLI immobox Marelli, transponder maker
• 4. Alfa Romeo, Iveco CODE1 immobox Bosch, transponder maker
• 5. Alfa Romeo CODE2 immobox Bosch, transponder maker
• 6. Fiat, Lancia, Alfa Romeo BSI Marelli, transponder maker, pin calculator
• 7. Fiat, Lancia, Alfa Romeo BSI Delphi, transponder maker, pin calculator
• 8. Fiat, Citroen, Peugeot CODE2 Delphi, transponder maker, pin calculator
• 9. Audi immobox Delphi, transponder maker
• 10. Audi immobox Delphi, transponder maker
• 11. Peugeot, Fiat, Citroen immobox Siemens, transponder maker
• 12. Peugeot, Citroen immobox Valeo, transponder maker
• 13. Peugeot, Fiat, Lancia, Citroen CPH Textron, transponder maker
• 14. Peugeot 206 BSI Siemens, transponder maker
• 15. Peugeot 406 BSI Siemens, transponder maker
• 16. Daewoo immobox, transponder maker
• 17. Honda, Rover immobox Valeo, transponder maker
• 18. Honda, Acura immobox Megamos, transponder maker
• 19. Opel IMMO1 immobox Siemens, transponder maker
• 20. Opel IMMO2 immobox Siemens, transponder maker
• 21. Mitsubishi immobox Bosch, transponder maker
• 22. VW, Skoda, Seat IMMO1 immobox Siemens, transponder maker
• 23. VW, Seat IMMO2 immobox Siemens, transponder maker
• 24. VW, Seat IMMO3 immobox Valeo, transponder maker
• 25. Seat, Peugeot, Piaggio bike immobox Marelli, transponder maker
• 26. Renault immobox Siemens, transponder maker
• 27. Renault immobox Valeo, transponder maker
• 28. Renault, Dacia immobox Sagem, transponder maker
• 29. Renault BSI Valeo, transponder maker
• 30. Renault UCH Sagem, transponder maker, pin calculator
• 31. Renault UCH Siemens, transponder maker, pin calculator
• 32. Mercedes Sprinter, Vito immobox Temic, transponder maker
• 33. Peugeot bike engine ECU Marelli, transponder maker
• 34. Volvo IMMO3 immobox Bosch, transponder maker
• 35. Volvo, Mitsubishi Cartronic immobox Bosch, transponder maker
• 36. Iveco Daily, Truck immobox Bosch, transponder maker, pin calculator
• 37. Mercedes Actros, Atego engine ECU Temic, transponder maker
• 38. Opel Frontera immobox Megamos, transponder maker, pin calculator
• 39. PSA, VAG, Opel, Ford new chip, transponder maker
• 40. BMW, Rover, Mini immobox EWS, transponder maker
• 41. Mazda immobox Temic, transponder maker
• 42. Mazda immobox Lucas 1J45, transponder maker
• 43. Nissan, Subaru immobox Siemens, transponder maker
• 44. Renault UCH Sagem type 2, transponder maker, pin calculator
• 45. Fiat, Citroen, Peugeot BSI Marelli type 2, transponder maker, pin calculator
• 46. Volvo IMMO1 immobox Bosch, transponder maker
• 47. Saab body module TWICE, transponder maker

Basic usage

• Install and launch the application on a workshop PC
• Connect the supported hardware interface and confirm it is detected
• Select the correct module from the dropdown based on the immobilizer or ECU type
• Load the required data file and review on screen information for the selected module
• Proceed only with lawful service steps and confirm vehicle ownership before any programming action

Operating systems

• Windows 7, Windows 8.1, Windows 10, Windows 11
• 32-bit or 64-bit depending on the build and connected hardware drivers

Minimum system requirements

• CPU: Dual-core 2.0 GHz or better
• RAM: 4 GB minimum, 8 GB recommended
• Storage: 500 MB free space for modules and saved files
• Network: Not required for core workflow
• Permissions: Admin rights recommended for installation and hardware drivers

Disclaimer
Source of Files. All software and resources in this post are collected from public and open sources on the internet. We do not claim authorship or ownership.
File Hosting. This forum does not host files. All links point to third party public cloud storage. We are not responsible for external content.
User Responsibility. Software is provided for educational and evaluation purposes only. You use it at your own risk. Authors of the post and forum administration are not liable for any damage.