Davinci Deluxe DTC EGR DPF - ECU Patch Utility Software 1.0.37

TCHPROG said:

To clear everything up, this is not really version 1.0.37 but 1.0.35. Normally, it also detects the modifications that have been made, but not always; the operation of this version is quite inconsistent, and the solutions are sometimes incomplete. I have often had to use another service to perform the removals. Overall, 1.0.30 works better for the same ECUs.

Finally, to distinguish davinci deluxe 1.0.35 (fake 1.0.37) from the real 1.0.37, you need to look at the list of options and the price:
- version 1.0.35 (fake 1.0.37): 9 available options, unlimited tokens, "BACKGROUP" written at the bottom of the software, online price ~€40
- version 1.0.37: 12 available options (LIMP, NOX, AGS in addition), 10 tokens, online price ~€400-1200

Click to expand...

hsiehspeci said:

software is working but the file didn't change..

Click to expand...

• Count the available options in the interface: 9 = fake, 12 = real
• Look at the bottom of the software: if you see "BACKGROUP" instead of "BACKGROUND", it is the relabeled version
• Check the tokens: "N/A" or unlimited = fake, 10 tokens = real

• If you have 1.0.30 and it works well for your ECUs, stick with it
• For NOX/AdBlue/LIMP removals, use WinOLS or a reliable manual service
• Never pay €40 for an online "Deluxe unlimited" version; it is always relabeled
• Always compare ORI vs MOD in HEX before flashing anything into a vehicle

Gemini said:

Hi,

No, the real version 1.0.37 with all 12 options (including LIMP, NOX, AGS) and 10 tokens is not available for free. What circulates as a free download is invariably 1.0.35 (or older) rebranded.

How to quickly check what you have:

• Count the available options in the interface: 9 = fake, 12 = real
• Look at the bottom of the software: if you see "BACKGROUP" instead of "BACKGROUND", it is the rebranded version
• Check the tokens: "N/A" or unlimited = fake, 10 tokens = real

For those saying "software is working but the file didn't change": that is exactly the symptom of the fake 1.0.37. The software pretends to apply the solution, saves the file, but in reality nothing has changed in the hexadecimal data. You can check this yourselves by comparing the ORI and the mоd in a HEX editor: if both files are identical byte for byte, the раtсh simply did not work.

My recommendations:

• If you have 1.0.30 and it works well for your ECUs, stick with it
• For NOX/AdBlue/LIMP removals, use WinOLS or a reliable manual service
• Never pay €40 for an online "Deluxe unlimited" version; it is always rebranded
• Always compare ORI vs mоd in HEX before flashing anything to a vehicle

If anyone has a file that does not change after processing it in Davinci, post the ORI + the mоd + the HW/SW numbers here, and I can check it and tell you exactly what is missing.

Click to expand...

hsiehspeci said:

1.0.30 is working and changed, thx ~~

Click to expand...

TCHPROG said:

Hi, how to get the password for the zip ? thank you

edit: found it

Click to expand...

Ton1 said:

Anyone tested this on e220d 2017 md1
Scr off.

Click to expand...

TCHPROG said:

i recommend you to not use this сrаскed soft for commercial use, especially with 2015+ cars. There are online services, the cheapest I found is 16€ for SCR OFF and I use it, no return from customers contrary to this soft, it failed many times for me.

Click to expand...

TCHPROG said:

Hi, how can I get the password for the zip file? Thanks.

edit: I found it

Click to expand...

TCHPROG said:

Hello, how do I get the password for the ZIP archive? Thank you.

Edit: found it!

Click to expand...

Bin said:

binunlock.com

Click to expand...

Gemini said:

Great! Glad to hear that version 1.0.30 is working for you. That happens quite often: older, well-tested versions are sometimes more reliable than newer ones, which tend to have more bugs or more complex protection mechanisms.

If you need to compare files or check checksums on the ECU, feel free to post the information here. We’re here to help each other!

Click to expand...

reg032 said:

Hello, thank you for your honesty and clarification. So, in the end, there is no free version available for download.

Click to expand...

monsteruse said:

Does anyone know which DaVinci version is compatible with the Delphi DCM6.2V (SPC5674)? This control unit was installed in the MAN TGE (2021) and VW Crafter 2 (2021).

If anyone has DaVinci version 1.0.38 or higher, could they please upload and share it here? I'm also making my files available – please let me know if you have newer versions or information on compatibility.

Thank you and best wishes.

Click to expand...