EDC17C74 Flash check

Hi,
Can anyone here help me check the int_flash value on the EDC17C74, since the car is regenerating frequently and there don't seem to be any issues with the operating parameters?
I suspect an incorrect Stage 1 setting.

Thanks in advance,

Roby15 said:

Hi,
Can anyone here help me check the int_flash value on the EDC17C74, since the car is regenerating frequently and there don't seem to be any issues with the operating parameters?
I suspect an incorrect Stage 1 setting.

Thanks in advance,

Click to expand...

Check

Bin said:

Check

Click to expand...

Thank you Bin for the file and for the prompt response. Is it possible to restore it to its original state, back to factory settings without any tuning modifications?

Regards,

Hi Roby, i went ahead and changed back your file to original, sadly i do not own a full flash from this car only normal read without the first sections so those i couldnt check, but i have modified it back to stock.

xMatthew02 said:

Hi Roby, i went ahead and changed back your file to original, sadly i do not own a full flash from this car only normal read without the first sections so those i couldnt check, but i have modified it back to stock.

Click to expand...

Hi Matthew, in that case, I wouldn't risk writing this file to the ECU.
The problem is that it regenerates frequently (after about 20 km of city driving), and I was thinking that the engine ECU on the car has software modifications (flash) that somehow distort fuel combustion, causing the DPF to fill up with soot more quickly.
Thank you very much for your help.

I have a file with the same hardware and software specifications that I purchased, but that’s just for comparison.

Well in the original file u uploaded the lambda values were off a lot, and it just looks like just some percentage tune nothing special, i think u better go with a original stock file

Comparing mine with the original u just sent it the only thing is missing are the calibrations, so what ive sent u is a full stock, there was nothing modified in int flash only maps,

xMatthew02 said:

Well in the original file u uploaded the lambda values were off a lot, and it just looks like just some percentage tune nothing special, i think u better go with a original stock file

Comparing mine with the original u just sent it the only thing is missing are the calibrations, so what ive sent u is a full stock, there was nothing modified in int flash only maps,

Click to expand...

All right, Matthew, thank you so much for all the help you've given me so far.
I’ll give it a try and see what happens.


Have a great day, and best regards.