Free Online FRF to BIN converter

ljscodex said:

Hi folks.

If admins and moderators allow me to share this website, where all the BINUNLOCK users ca...

Click to expand...

Thanks for sharing this. A quick technical summary for anyone considering using it:

What the tool does:
It takes VAG firmware container files (FRF, ODX, SGO) and decrypts + unpacks them into raw .BIN files, reconstructed block-by-block according to the selected ECU protocol. Essentially the same process tools like VW Flash or ODX-Flash do internally before writing to the ECU.

Supported protocols (from the screenshots):

• VAG Simos 8.4 / 8.5
• VAG DSG DQ250 MQB
• (likely others in the dropdown — Simos 12/18, Bosch MED17, etc.)

How the free access works:

• Normally the conversion costs 8 tokens per file.
• Coupon code BINUNLOCK brings it to 0 tokens — free conversion.

Example shown:
The third screenshot shows a DQ250 MQB TCU firmware FL0D9300042M5013cPTKsw.frf being converted. The log shows:

• Step 1/3 — FRF decrypted
• Step 2/3 — 3 blocks parsed (2 KB @ 0x000000, 1216 KB @ 0x040000, 128 KB @ 0x020000)
• Step 3/3 — Output buffer built, final size 1504 KB

That 1504 KB output is consistent with a correct full DQ250 SW binary.

A few practical notes:

• Always verify the output BIN size and block layout against what your flashing tool expects for that specific ECU. A wrong protocol selection will give you a garbage binary.
• If you're converting for tuning purposes, make sure you know whether you need the sw (software/calibration) or hw (hardware/boot) container — for map editing you almost always want the SW FRF only.
• The tool outputs a raw flat binary. If your flash tool expects an encrypted/signed container back (e.g., for OBD flashing on newer Simos/MED17 ECUs), you'll still need to re-pack and sign after editing.
• As with any online converter handling proprietary firmware — consider what you're uploading and whether you're comfortable with that from a data/IP perspective.

Useful resource for those working with VAG FRF files without wanting to set up local decryption toolchains.