Post #1
- Joined
- 03.05.2025
- Messages
- 1,865
- Reaction score
- 49,922
New Tuning File Available: VW Golf6 CBDC 2.0 TDI EDC17CP14 ECU File – Software 507643/SW 6179 03L906022G - Stage 1 & Stage 2 (NO DPF) tuning for Bosch EDC17CP14 – ECU 03L906022G / Prod 03L906022MC, calibrated for Golf6 2.0 TDI CR CBDC engine
Welcome to the official discussion thread for the VW 2.0 TDI CR tuning package. This calibration is specifically developed for the EDC17_CP14 ECU and optimized to work seamlessly with the 5M.
Target Performance: 110.0PS / 80.9KW.
Share your experience!
Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
➜ Download Tuning File / View Full Specs
Discussion & Reviews: VW 2.0 TDI CR#
Welcome to the official discussion thread for the VW 2.0 TDI CR tuning package. This calibration is specifically developed for the EDC17_CP14 ECU and optimized to work seamlessly with the 5M.
Target Performance: 110.0PS / 80.9KW.
Share your experience!Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information#
- Includes both Stage 1 and Stage 2 calibrations for Golf 6 2.0 TDI CBDC
- Stage 1 improves torque and throttle response for daily driving
- Stage 2 removes DPF logic and increases boost/fuel limits
- EGR strategy untouched for flexibility with various hardware setups
- Injection duration and limiter maps optimised in both stages
- Driver request and smoke maps revised for smooth power delivery
- Torque limiters expanded in high load zones for Stage 2
- Factory cold-start routines retained
- ECU compatibility: Bosch EDC17CP14 – 03L906022G
- Delivered as complete binary set including original, st1 and st2
➜ Download Tuning File / View Full Specs
