icom

Perform a factory reset if you face one of the following issues: • Single ICOM is offline in WSM although it is connected • Single ICOM is green and OK in WSM, but it is not available in Connection Manager and therefore cannot be reserved • Single ICOM is offline in WSM, but it is available in...

BMW ECC is a compact configuration utility for setting up communication between BMW diagnostic software and supported vehicle interfaces. The interface shown in the screenshots focuses on EDIABAS connection profiles and allows quick selection of ENET, ZGW, REMOTE, RPLUS/ICOM, and STD...

New release thread for EDIABAS RPLUS ICOM Configuration How-To Guide: discuss, share feedback, and get help. https://binunlock.com/resources/ediabas-rplus-icom-configuration-how-to-guide.469/ EDIABAS RPLUS ICOM Configuration How-To Guide EDIABAS 7.6.0 – step by step RPLUS setup for stable BMW...

This resource is a pure how-to guide that explains how to configure a second standalone EDIABAS installation to use RPLUS mode with a BMW ICOM interface. There are no downloads in this resource: all steps are performed with existing EDIABAS files and two configuration screenshots that you insert...

New release thread for BMW ISTA-D Standalone (Rheingold) + SQLiteDBs + BLP + EDIABAS: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-ista-d-standalone-rheingold-sqlitedbs-blp-ediabas.423/ BMW ISTA-D Standalone (Rheingold) + SQLiteDBs + BLP + EDIABAS BMW ISTA-D...

This package is a full BMW ISTA-D (Rheingold) 4.52.40 Standalone diagnostic setup. Everything is prepared to install and run ISTA-D offline with pre-packed SQLite databases, BLP data, EDIABAS runtime and ICOM firmware in one place. Works with K+DCAN, ENET and ICOM interfaces for E, F, G and I...

New release thread for BMW Diagnostic Head and DIS-ICOM Helper Toolkit: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-diagnostic-head-and-dis-icom-helper-toolkit.416/ BMW Diagnostic Head and DIS-ICOM Helper Toolkit BMW Diagnostic Head Emulator v1.2 with DIS-Icom...

This toolkit brings together BMW Diagnostic Head Emulator v1.2 (DiagHead), the DIS-Icom Java bridge and the ECC_INSIDE_EDIABAS utilities. Together they emulate a BMW diagnostic head on a Windows host so VMware DIS/GT1 or SSS/Progman virtual machines can talk to EDIABAS, INPA and other BMW...

New release thread for BMW EasyConnect EDIABAS Interface Config Tool: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-easyconnect-ediabas-interface-config-tool.412/ BMW EasyConnect EDIABAS Interface Config Tool v1.0.5320.35550 EasyConnect utility to switch EDIABAS...

This package provides the EasyConnect Utility v1.0.5320.35550 used to configure EDIABAS interface settings for BMW diagnostic environments. EasyConnect offers a simple graphical front end to switch between STD:OBD, REMOTE and ENET modes and to prepare ICOM or OPS heads for use with INPA, WinKFP...

New release thread for BMW EasyKFP Interface Mode Switch Utility: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-easykfp-interface-mode-switch-utility.411/ BMW EasyKFP Interface Mode Switch Utility v2.0 EasyKFP helper to switch EDIABAS interface modes for OPS and...

This package contains BMW EasyKFP 2.0, a small helper utility for EDIABAS based BMW diagnostic environments. EasyKFP is used to switch EDIABAS interface modes and configure IP communication to OPS or ICOM heads so that tools such as INPA, WinKFP and ISTA/P can connect reliably over Ethernet...

New release thread for BMW ISTA-P StandAlone: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-ista-p-standalone.402/ BMW ISTA-P StandAlone Offline dealer-level BMW programming & coding package – preconfigured ISTA-P 72.0.300 standalone. Frequently Asked Questions...

This download is a multi-version BMW ISTA-P programming pack built around ISTA-P 3.72.x / 3.73.x and a full set of external ISTA-P Loaders. You get original DAT / SYS installer files for several ISTA-P releases, an optional 72.0.300 StandAlone build, plus Loader packages 4.3–6.6 for working over...

New release thread for ITool Radar — BMW ICOM discovery & reservation utility (x86/x64): discuss, share feedback, and get help. https://binunlock.com/resources/itool-radar-bmw-icom-discovery-reservation-utility-x86-x64.392/ ITool Radar — BMW ICOM discovery & reservation utility (x86/x64)...

ITool Radar is a small Service Location Protocol (SLP) utility used in BMW diagnostic setups to discover ICOM/VCI devices, view their status and properties, and reserve or release a device for exclusive use by ISTA, E-Sys or other tools. It can also bind SLP to a specific NIC and add extra IPs...

New release thread for BMW ICOM Remote Manager — Scan, Reserve and EDIABAS Setup: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-icom-remote-manager-scan-reserve-and-ediabas-setup.306/ BMW ICOM Remote Manager — Scan, Reserve and EDIABAS Setup v1.2 Local and remote...

What is BMW ICOM Remote Manager? BMW ICOM Remote Manager is a lightweight Windows helper for configuring and connecting BMW ICOM interfaces. It simplifies IP discovery, reservation and EDIABAS configuration for both local workshop use and remote sessions over VPN. Highlights Automatic ICOM...

New release thread for BMWAi Coder&Tools — Lightweight BMW Coding Utility for F/I/K/R Series: discuss, share feedback, and get help. https://binunlock.com/resources/bmwai-coder-tools-lightweight-bmw-coding-utility-for-f-i-k-r-series.191/ BMWAi Coder&Tools — Lightweight BMW Coding Utility for...

BMWAi Coder&Tools — quick coding helper for BMW F/I/K/R platforms 🔧 A compact Windows tool that detects the car via ENET or ICOM and gives you fast access to common service/coding helpers. The UI supports multiple languages and groups functions like SVK/FSC utilities, DTC management, time sync...