BMW GT1 / DIS / SSS Progman – Complete DIAG & PROG Software Pack Final

Full set of ready-to-run BMW GT1 / DIS and SSS Progman virtual machines for VMware.
Covers most classic BMW E-series and Mini models up to around 2008:

E36, E38, E39, E46, E53, E60/E61, E63/E64, E65/E66, E83, E85, early E87/E90, MINI.

The pack gives you:

• Diagnostics – fault code read/clear, test plans, live data, adaptations, service resets.
• Coding & programming – update ECUs, code options, replace modules.
• Virtual machines – GT1 DIAG, GT1 PROG, Virtual GT1 and DIS/ProgCod in VMware format.

No local installs needed: import OVA / 7z into VMware, configure network + interface – and you have a full BMW GT1 / DIS / SSS environment on your laptop.

---

1. DIS / GT1 – BMW diagnostics

This section is for BMW DIS GT1 diagnostic virtual machines.

• GT1-DIAG-1.0.ova
  First stable GT1 DIS virtual machine.
  – Core E-series coverage;
  – Standard dealer functions: DTC read/erase, live data, test plans, adaptations, service resets (oil, brake, CBS where supported);
  – Very good compatibility with older interfaces (ADS/OBD, pure K-line).
• GT1-DIAG-1.0.1.ova
  Updated DIS / GT1 image.
  – Improved support for late E46/E39, more models in the same generation;
  – Better behaviour on CAN-based cars and MOST gateway integration;
  – Slightly faster boot and more stable work inside VMware.
• GT1-DIAG-2.0.1.ova
  Advanced DIS / GT1 revision.
  – Extended chassis list: E60/E61, E63/E64, E65/E66, E70 etc. within the GT1 era;
  – Newer data, more test plans and guided functions;
  – Optimised for modern laptops and ICOM / J2534 pass-through (with correct host setup).
• VirDis_75_Diagnosis.7z
  Lightweight Virtual DIS v75 image focused only on diagnostics.
  – Great “quick BMW/MINI scan” VM;
  – Smaller size and faster load, ideal for older hardware.
• ISPI.TRIC.Virtual-GT1_1.0_DAT.7z
• ISPI.TRIC.Virtual-GT1_1.0.1.7z
• ISPI.TRIC.Virtual-GT1_2.0.1.7z
  
  Official-style ISPI / TRIC Virtual GT1 images:
  – Preconfigured system and network environment;
  – Different revisions (1.0 / 1.0.1 / 2.0.1) so you can pick what works best with your interface;
  – Good base if you want to build your own customised GT1 virtual machine.

Main DIS / GT1 functions:
• Full vehicle and ECU identification;
• Read / clear fault codes with detailed descriptions and printable reports;
• Guided test plans with wiring hints and expected values;
• Live data and measurement blocks;
• Adaptations, calibrations and initialisations (DSC, EGS, DDE/DME, steering angle, throttle, etc. – depending on chassis);
• Service functions: service interval reset, brake bleed, EPB procedures, battery registration, etc. where supported by GT1 generation.

---

2. Progman / SSS – coding & programming

This block is about BMW SSS Progman programming: flashing and coding ECUs.

• GT1-PROG-1.0.ova
  First VMware image with SSS Progman.
  – Basic programming/coding for classic E-series;
  – Simple workflow: choose model, control unit, then required measures;
  – Good entry-level VM to learn how Progman behaves.
• GT1-PROG-1.0.1.ova
  Updated SSS Progman VM.
  – Additional data for later production years on some E-series;
  – Bug fixes and more stable long programming sessions.
• GT1-PROG-2.0.1.ova
  Extended BMW GT1 Progman virtual machine.
  – Newer integration level of programming data;
  – More ECUs supported (DDE/DME, EGS, DSC, LCM/FRM, KOMBI, etc.);
  – Better tuning for VMware, faster launch and smoother UI.

Main Progman / SSS functions:
• Programming (flashing) control units after replacement or software update;
• Coding vehicle options and configuration (languages, region, equipment flags, etc.);
• Automatic “measures plan” calculation from VIN;
• Detailed log of all operations.

Warning: any BMW SSS programming operation carries normal flashing risks (power loss, communication drop, wrong interface).
Always use a stable power supply for car and laptop, and a supported interface (ICOM / high-quality K-DCAN / J2534 according to your setup).

---

3. Virtual DIS coding image

• Virtual_DIS_ProgCod.7z
  Specialised DIS + ProgCod virtual machine:
  – Focus on coding control units (LCM/FRM, KOMBI, GM, ZKE, etc.);
  – Handy when you only need to change configuration without full SSS programming;
  – Perfect companion to the DIAG and PROG VMs above.

---

4. Archive contents overview

Diagnostics (DIS / GT1 / Virtual DIS / Virtual GT1):

• GT1-DIAG-1.0.ova
• GT1-DIAG-1.0.1.ova
• GT1-DIAG-2.0.1.ova
• VirDis_75_Diagnosis.7z
• ISPI.TRIC.Virtual-GT1_1.0_DAT.7z
• ISPI.TRIC.Virtual-GT1_1.0.1.7z
• ISPI.TRIC.Virtual-GT1_2.0.1.7z

Programming / coding (SSS Progman / DIS coding):

• GT1-PROG-1.0.ova
• GT1-PROG-1.0.1.ova
• GT1-PROG-2.0.1.ova
• Virtual_DIS_ProgCod.7z

All files are ready OVA or compressed VMs for VMware (or compatible hypervisor).
No native Windows installations are required: just import, configure network + interface passthrough, and work.

---

5. Usage tips

• For older chassis (E36/E38/E39/E46) GT1-DIAG-1.0.x + PROG-1.0.x is usually enough.
• For E60/E61, E63/E64, E65/E66, E70 and newer E-series inside GT1 era, use the 2.0.1 line.
• If you only need diagnostics, pick any DIAG VM or VirDis_75_Diagnosis.
• For serious BMW SSS Progman programming, go with GT1-PROG-2.0.1 plus stable power and a proper interface.
• ISPI.TRIC Virtual-GT1 images are ideal if you want a clean OEM-style base BMW GT1 virtual machine and add your own tools on top.