ediabas

MS45 Flasher is a focused Windows utility for identifying, reading and writing supported BMW Siemens MS45/MS45.1 engine-control units through EDIABAS. Its interface separates full-binary, program, tune and MPC operations so an experienced technician can choose the correct memory area instead of...

BMW Diesel AGR-Rate is a focused Windows service utility for reading and programming a supported exhaust-gas-recirculation adaptation value through an existing BMW EDIABAS diagnostic environment. It does not flash the engine ECU; it requests an adaptation change through the selected diagnostic...

BMW ECC is a compact configuration utility for setting up communication between BMW diagnostic software and supported vehicle interfaces. The interface shown in the screenshots focuses on EDIABAS connection profiles and allows quick selection of ENET, ZGW, REMOTE, RPLUS/ICOM, and STD...

New release thread for EDIABAS RPLUS ICOM Configuration How-To Guide: discuss, share feedback, and get help. https://binunlock.com/resources/ediabas-rplus-icom-configuration-how-to-guide.469/ EDIABAS RPLUS ICOM Configuration How-To Guide EDIABAS 7.6.0 – step by step RPLUS setup for stable BMW...

This resource is a pure how-to guide that explains how to configure a second standalone EDIABAS installation to use RPLUS mode with a BMW ICOM interface. There are no downloads in this resource: all steps are performed with existing EDIABAS files and two configuration screenshots that you insert...

New release thread for BMW ISTA-D Standalone (Rheingold) + SQLiteDBs + BLP + EDIABAS: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-ista-d-standalone-rheingold-sqlitedbs-blp-ediabas.423/ BMW ISTA-D Standalone (Rheingold) + SQLiteDBs + BLP + EDIABAS BMW ISTA-D...

This package is a full BMW ISTA-D (Rheingold) 4.52.40 Standalone diagnostic setup. Everything is prepared to install and run ISTA-D offline with pre-packed SQLite databases, BLP data, EDIABAS runtime and ICOM firmware in one place. Works with K+DCAN, ENET and ICOM interfaces for E, F, G and I...

New release thread for BMW Diagnostic Head and DIS-ICOM Helper Toolkit: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-diagnostic-head-and-dis-icom-helper-toolkit.416/ BMW Diagnostic Head and DIS-ICOM Helper Toolkit BMW Diagnostic Head Emulator v1.2 with DIS-Icom...

This toolkit brings together BMW Diagnostic Head Emulator v1.2 (DiagHead), the DIS-Icom Java bridge and the ECC_INSIDE_EDIABAS utilities. Together they emulate a BMW diagnostic head on a Windows host so VMware DIS/GT1 or SSS/Progman virtual machines can talk to EDIABAS, INPA and other BMW...

New release thread for BMW EDIABAS Multi-Version Runtime and Tools Pack: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-ediabas-multi-version-runtime-and-tools-pack.415/ BMW EDIABAS Multi-Version Runtime and Tools Pack 6.4.3 / 6.4.7 / 7.3.0 / 7.6 / 7.7.x EDIABAS...

This resource is a consolidated collection of BMW EDIABAS runtimes and related support files covering classic versions 6.4.3 and 6.4.7 up to 7.3.0, 7.6, 7.7.0 and 7.7.2. EDIABAS is BMW’s Electronic Diagnostic Basic System, the communication layer used by INPA, NCS Expert, WinKFP, Tool32 and...

New release thread for BMW EasyConnect EDIABAS Interface Config Tool: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-easyconnect-ediabas-interface-config-tool.412/ BMW EasyConnect EDIABAS Interface Config Tool v1.0.5320.35550 EasyConnect utility to switch EDIABAS...

This package provides the EasyConnect Utility v1.0.5320.35550 used to configure EDIABAS interface settings for BMW diagnostic environments. EasyConnect offers a simple graphical front end to switch between STD:OBD, REMOTE and ENET modes and to prepare ICOM or OPS heads for use with INPA, WinKFP...

New release thread for BMW EasyKFP Interface Mode Switch Utility: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-easykfp-interface-mode-switch-utility.411/ BMW EasyKFP Interface Mode Switch Utility v2.0 EasyKFP helper to switch EDIABAS interface modes for OPS and...

This package contains BMW EasyKFP 2.0, a small helper utility for EDIABAS based BMW diagnostic environments. EasyKFP is used to switch EDIABAS interface modes and configure IP communication to OPS or ICOM heads so that tools such as INPA, WinKFP and ISTA/P can connect reliably over Ethernet...

New release thread for Dr.Gini B022 (build 105) — patched / unlimited: discuss, share feedback, and get help. https://binunlock.com/resources/dr-gini-b022-build-105-patched-unlimited.360/ Dr.Gini B022 (build 105) — patched / unlimited B022 build 105 — fast EDIABAS diagnostics, VO read, live...

Dr.Gini is a BMW-focused diagnostic application built on the EDIABAS communication layer. It helps identify ECUs, read and clear faults, inspect vehicle order data, view live parameters, and run expert jobs for service operations. Highlights ECU identification with UIF view and basic status...

New release thread for BMW ICOM Remote Manager — Scan, Reserve and EDIABAS Setup: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-icom-remote-manager-scan-reserve-and-ediabas-setup.306/ BMW ICOM Remote Manager — Scan, Reserve and EDIABAS Setup v1.2 Local and remote...

What is BMW ICOM Remote Manager? BMW ICOM Remote Manager is a lightweight Windows helper for configuring and connecting BMW ICOM interfaces. It simplifies IP discovery, reservation and EDIABAS configuration for both local workshop use and remote sessions over VPN. Highlights Automatic ICOM...

New release thread for BMW FRM OBD Reset Tool — Short Circuit Counter Repair: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-frm-obd-reset-tool-short-circuit-counter-repair.263/ BMW FRM OBD Reset Tool — Short Circuit Counter Repair OBD recovery for FRM70 FRM87 and...