ktag

Stage 1 tuning file for Renault Megane 2 2.0 DCI (2007) with Bosch EDC16CP33 ECU. Power raised up to 209hp with improved torque response, fast spool and smooth drivability. Designed for stock turbos with supporting mods optional.

New Tuning File Available: Renault Laguna 3 2.0 DCI Bosch EDC16CP33 ECU File – SW-Version 509401 8201119693 - Stage 1 + Stage 2 NO DPF tuning for Laguna 3 2.0 DCI — dual setup for torque or full DPF-off performance 💬 Discussion & Reviews: Renault 2.0 DCI Welcome to the official discussion...

Two-stage tuning for Renault Laguna 3 2.0 DCI with Bosch EDC16CP33: Stage 1 for daily torque boost, Stage 2 NO DPF for full performance and emissions-off. Cleanly developed and dyno-tested.

New Tuning File Available: VW Jetta 2.0 TDI ECU File – 564293 EDC17CP14 (Stage 1 + DPF + EGR) 03L907309AA - ECU calibration for VW Jetta CJAA 2.0 TDI with DSG — Bosch EDC17CP14, tuned for Stage 1 and emissions system deactivation. 💬 Discussion & Reviews: VW Jetta Welcome to the official...

Performance and efficiency go hand in hand with this Stage 1 tuning file for the 2012 VW Jetta 2.0 TDI CJAA engine. Tailored for the Bosch EDC17CP14 ECU (software 564293), this binary delivers improved drivability, stronger mid-range torque, and cleaner response with DPF and EGR systems...

New Tuning File Available: New Holland T7.290 ECU File – EDC17CV41 511206 (SCR Off + Performance Stage 1++) 511206 - Enhanced ECU calibration for New Holland T7.290 – SCR/AdBlue deactivation and power boost in Stage 1++ remap. 💬 Discussion & Reviews: New Holland 2018 Welcome to the official...

Optimised for the New Holland T7.290 with Bosch EDC17CV41 control unit, this Stage 1++ tuning file delivers a significant torque increase while fully disabling the SCR/AdBlue injection system. This solution is tailored for agricultural machinery operating under heavy load conditions. The...

This tuning file delivers a refined Stage 1 calibration for the 3.0L Mitsubishi Fuso DDi turbo-diesel platform (2012). Engine torque delivery is noticeably improved while all major emissions systems — DPF, EGR, AdBlue — are professionally disabled. Built on the Bosch EDC17CP52 platform...

New Tuning File Available: Mercedes Sprinter W906 ECU File – EDC17CP10 525436 (Stage 1 + DPF EGR AdBlue Off) CR6NFZ - Full emissions-off Stage 1 calibration for Sprinter W906 3.0 V6 — DPF, EGR, AdBlue OFF on Bosch EDC17CP10. 💬 Discussion & Reviews: MB 219/319/419/519 CDI 190hp Welcome to the...

This Stage 1 remap is designed for the 2011 Mercedes-Benz Sprinter W906 (219/319/419/519 CDI) equipped with the 3.0L V6 turbo-diesel engine and Bosch EDC17CP10 ECU. With software version 525436, it provides complete DPF, EGR and SCR (AdBlue) system removal alongside a performance increase for...

New Tuning File Available: Mercedes Sprinter 2.1 Bluetec ECU File – EDC17CP57 524978 (DPF EGR AdBlue Swirl OFF + Stage 1) 524978 - Stage 1 + Full emissions delete (DPF, EGR, AdBlue, swirl flaps) for MB Sprinter 2.1 Bluetec — Bosch EDC17CP57. 💬 Discussion & Reviews: MB 2.1 Bluetec Welcome to...

Custom calibration for the 2015 Mercedes-Benz Sprinter 2.1 Bluetec delivers a torque-focused Stage 1 upgrade along with complete emissions removal: DPF, EGR, SCR (AdBlue), swirl flaps, and all associated DTCs are fully disabled. Based on the Bosch EDC17CP57 ECU (Software ID 524978), the binary...

This binary was developed for the 2012 Isuzu NRR 5.2L Turbo-Diesel and delivers a refined Stage 1 calibration. Emissions systems such as DPF, EGR, and AdBlue have been completely removed, and specific diagnostic trouble codes (DTCs) are suppressed for fault-free operation. Built on the Denso...

New Tuning File Available: Caterpillar C4.4 ACERT ECU File – ADEM 4 4176020-00 Firmware (Stage 1 Tuning) 4176020 - CAT C4.4 136HP ADEM 4 ECU file with Stage 1 performance tune – full binary 💬 Discussion & Reviews: Caterpillar 2013 Welcome to the official discussion thread for the Caterpillar...

Stage 1 tuning file for Caterpillar C4.4 ACERT engine (Tier 4 Interim, 2013) running ADEM 4 ECU with firmware 4176020-00 / 5163302-00. This full binary provides enhanced torque and throttle response while retaining emission system compatibility. Ideal for off-highway machines such as skid...

New Tuning File Available: Audi A3 1.8 TFSI CJS Stage 2 ECU File – Software SC800H4100000 SIMOS18 (Decat + Pop&Bang + RPM Max) 8V0906264A - Audi A3 1.8 TFSI Stage 2 file with Pop&Bang, Decat, RPM limit raised – SIMOS18, SW SC800H4100000 💬 Discussion & Reviews: Audi 1.8 TFSI 180hp Welcome to...

Advanced Stage 2 tuning file for Audi A3 1.8 TFSI CJS engine (2015, DSG), based on Siemens SIMOS18 ECU with software ID SC800H4100000. Includes decat (no post-cat lambda), raised rev limiter, and Pop&Bang functionality in Sport mode. Designed for performance setups with downpipe/exhaust...

New Tuning File Available: Mercedes-Benz ML164 ML350 3.0 CDI Stage 1 ECU File – Software 512423 EDC17CP10 CR6EU5 - Stage 1 remap with EGR OFF for Mercedes ML350 3.0 CDI (EDC17CP10, SW 512423) via K-TAG 💬 Discussion & Reviews: MB ML350 (642820) Welcome to the official discussion thread for the...

Optimized Stage 1 tuning file for the 3.0 CDI ML350 (2010, ML164 chassis) with Bosch EDC17CP10 ECU. Calibrated for software version 512423, this file improves torque delivery and throttle responsiveness, while deactivating the EGR system for cleaner engine operation. Read via Alientech K-TAG and...

New Tuning File Available: Kia cee’d 1.6 CRDi 2015 Bosch EDC17_C08 Software 530952 530952 - Stage 1 ECU tuning for Kia cee’d 1.6 CRDi (EDC17_C08, SW 530952) — sharper diesel response, refined torque 💬 Discussion & Reviews: Kia 1.6 CRDi Welcome to the official discussion thread for the Kia 1.6...