xDecoder 14.0 — Activation, Support and ECU Coverage 14.0

saahhoo said:

DC0F3D1F3FEB2325
Thanks

Click to expand...

Bin said:

xDecoder 14.0 — Official Discussion Thread​

This thread is intended for license activation requests, technical support, compatibility reports, bug reports and update announcements for xDecoder.

xDecoder DTC Manager — Bosch and Delphi Map Utility

03.10.2025

v12.7 Offline DTC tables, mask and path mapping for quick fault code disables

• Bin
• bosch dcm6.1 delphi diagnostic software dtc off ecu software ford xdecoder
• ⚙️ Tuning Tools & Software

The current release is xDecoder 14.0, featuring expanded support for Bosch, Continental, Delphi, Siemens and Visteon ECUs used by BMW, Ford, Iveco, VAG, PSA, Renault, Nissan and Dacia vehicles.

License Activation​

To request activation:

1. Download and fully extract the current xDecoder package.
2. Run START-xDecoder.exe.
3. Copy the displayed 16-character Hardware Identifier.
4. Reply to this thread and post your HWID.
5. Wait for your personal .reg license file to be issued.
6. Close xDecoder before installing the license.
7. Download the supplied .reg file and double-click it.
8. Confirm that the license information may be added to the Windows Registry.
9. Launch the program again using START-xDecoder.exe.

Each license is generated for one specific HWID. A registry file issued for another computer will not work.

The filename of your license will be based on your own hardware identifier and will therefore be different for every user.

If the Hardware Identifier window appears again after importing the registry file, post the newly displayed HWID together with a screenshot of the activation window.

Current ECU Coverage Added in Recent Releases​

• 14.0 — Delphi DCM6.1 for Ford
• 13.9 — Continental SID211 for Ford
• 13.8 — Bosch MD1CS069 for Iveco
• 13.7 — Bosch MD1CP014 for VAG
• 13.6 — Bosch MD1CS004 for VAG
• 13.5 — Visteon ESU412 for Ford
• 13.4 — Bosch MG1CS201 for BMW
• 13.3 — Bosch MG1CS024 for BMW
• 13.2 — Bosch MG1CS003 for BMW
• 13.1 — Continental EMS3155 for Renault, Nissan and Dacia
• 13.0 — Siemens SID803 for PSA
• 12.9 — Bosch EDC17CP65 for Ford
• 12.8 — Bosch EDC17C45 for Nissan and Renault light commercial vehicles

SID803 note: Modifications are applied to the MPC file, but both the MPC and external flash files are required for complete decoding.

MD1CS069 note: Additional original files are still useful for broader testing and compatibility verification.

Technical Support and Bug Reports​

When reporting a problem, include as much of the following information as possible:

• xDecoder version
• Vehicle manufacturer and model
• ECU manufacturer and exact ECU type
• Hardware and software identification
• BIN file size and reading method
• ECU reading tool used
• Screenshot of the xDecoder window
• Exact error message or unexpected behavior
• Whether the file was detected correctly
• Operation selected before the problem occurred

Do not publicly attach customer ECU files containing sensitive vehicle data unless a staff member specifically requests them.

Installation Notes​

• Install version 14.0 into a new clean folder
• Do not combine files from different xDecoder versions
• Do not run the application directly from an archive
• Keep all included EXE, DLL and BIN components together
• Always launch the program through START-xDecoder.exe
• Do not start Decoder.exe directly

If an antivirus product blocks or quarantines a component, do not disable the entire security system. Post the exact detection name and affected filename in this thread first.

File Safety​

Always preserve the untouched original ECU read. Work only with a separate copy and save every processed result under a new filename.

A removed DTC does not repair the electrical, mechanical or software-related cause of the fault. Verify the modified file and its checksums before programming it into a control unit.

Download and Full Description​

View the complete description and download xDecoder DTC Manager

Click to expand...

iltecnico said:

hardware id 77074FCF39C8A73A

Click to expand...

Bin said:

xDecoder 14.0 — Official Discussion Thread​

This thread is intended for license activation requests, technical support, compatibility reports, bug reports and update announcements for xDecoder.

xDecoder DTC Manager — Bosch and Delphi Map Utility

03.10.2025

v12.7 Offline DTC tables, mask and path mapping for quick fault code disables

• Bin
• bosch dcm6.1 delphi diagnostic software dtc off ecu software ford xdecoder
• ⚙️ Tuning Tools & Software

The current release is xDecoder 14.0, featuring expanded support for Bosch, Continental, Delphi, Siemens and Visteon ECUs used by BMW, Ford, Iveco, VAG, PSA, Renault, Nissan and Dacia vehicles.

License Activation​

To request activation:

1. Download and fully extract the current xDecoder package.
2. Run START-xDecoder.exe.
3. Copy the displayed 16-character Hardware Identifier.
4. Reply to this thread and post your HWID.
5. Wait for your personal .reg license file to be issued.
6. Close xDecoder before installing the license.
7. Download the supplied .reg file and double-click it.
8. Confirm that the license information may be added to the Windows Registry.
9. Launch the program again using START-xDecoder.exe.

Each license is generated for one specific HWID. A registry file issued for another computer will not work.

The filename of your license will be based on your own hardware identifier and will therefore be different for every user.

If the Hardware Identifier window appears again after importing the registry file, post the newly displayed HWID together with a screenshot of the activation window.

Current ECU Coverage Added in Recent Releases​

• 14.0 — Delphi DCM6.1 for Ford
• 13.9 — Continental SID211 for Ford
• 13.8 — Bosch MD1CS069 for Iveco
• 13.7 — Bosch MD1CP014 for VAG
• 13.6 — Bosch MD1CS004 for VAG
• 13.5 — Visteon ESU412 for Ford
• 13.4 — Bosch MG1CS201 for BMW
• 13.3 — Bosch MG1CS024 for BMW
• 13.2 — Bosch MG1CS003 for BMW
• 13.1 — Continental EMS3155 for Renault, Nissan and Dacia
• 13.0 — Siemens SID803 for PSA
• 12.9 — Bosch EDC17CP65 for Ford
• 12.8 — Bosch EDC17C45 for Nissan and Renault light commercial vehicles

SID803 note: Modifications are applied to the MPC file, but both the MPC and external flash files are required for complete decoding.

MD1CS069 note: Additional original files are still useful for broader testing and compatibility verification.

Technical Support and Bug Reports​

When reporting a problem, include as much of the following information as possible:

• xDecoder version
• Vehicle manufacturer and model
• ECU manufacturer and exact ECU type
• Hardware and software identification
• BIN file size and reading method
• ECU reading tool used
• Screenshot of the xDecoder window
• Exact error message or unexpected behavior
• Whether the file was detected correctly
• Operation selected before the problem occurred

Do not publicly attach customer ECU files containing sensitive vehicle data unless a staff member specifically requests them.

Installation Notes​

• Install version 14.0 into a new clean folder
• Do not combine files from different xDecoder versions
• Do not run the application directly from an archive
• Keep all included EXE, DLL and BIN components together
• Always launch the program through START-xDecoder.exe
• Do not start Decoder.exe directly

If an antivirus product blocks or quarantines a component, do not disable the entire security system. Post the exact detection name and affected filename in this thread first.

File Safety​

Always preserve the untouched original ECU read. Work only with a separate copy and save every processed result under a new filename.

A removed DTC does not repair the electrical, mechanical or software-related cause of the fault. Verify the modified file and its checksums before programming it into a control unit.

Download and Full Description​

View the complete description and download xDecoder DTC Manager

Click to expand...

mm3812312 said:

Hola gracias por el archivo y la futura activacion eres el mejor
mi id es
9541224E3AFC398B

Click to expand...

Bin said:

xDecoder 14.0 — Official Discussion Thread​

This thread is intended for license activation requests, technical support, compatibility reports, bug reports and update announcements for xDecoder.

xDecoder DTC Manager — Bosch and Delphi Map Utility

03.10.2025

v12.7 Offline DTC tables, mask and path mapping for quick fault code disables

• Bin
• bosch dcm6.1 delphi diagnostic software dtc off ecu software ford xdecoder
• ⚙️ Tuning Tools & Software

The current release is xDecoder 14.0, featuring expanded support for Bosch, Continental, Delphi, Siemens and Visteon ECUs used by BMW, Ford, Iveco, VAG, PSA, Renault, Nissan and Dacia vehicles.

License Activation​

To request activation:

1. Download and fully extract the current xDecoder package.
2. Run START-xDecoder.exe.
3. Copy the displayed 16-character Hardware Identifier.
4. Reply to this thread and post your HWID.
5. Wait for your personal .reg license file to be issued.
6. Close xDecoder before installing the license.
7. Download the supplied .reg file and double-click it.
8. Confirm that the license information may be added to the Windows Registry.
9. Launch the program again using START-xDecoder.exe.

Each license is generated for one specific HWID. A registry file issued for another computer will not work.

The filename of your license will be based on your own hardware identifier and will therefore be different for every user.

If the Hardware Identifier window appears again after importing the registry file, post the newly displayed HWID together with a screenshot of the activation window.

Current ECU Coverage Added in Recent Releases​

• 14.0 — Delphi DCM6.1 for Ford
• 13.9 — Continental SID211 for Ford
• 13.8 — Bosch MD1CS069 for Iveco
• 13.7 — Bosch MD1CP014 for VAG
• 13.6 — Bosch MD1CS004 for VAG
• 13.5 — Visteon ESU412 for Ford
• 13.4 — Bosch MG1CS201 for BMW
• 13.3 — Bosch MG1CS024 for BMW
• 13.2 — Bosch MG1CS003 for BMW
• 13.1 — Continental EMS3155 for Renault, Nissan and Dacia
• 13.0 — Siemens SID803 for PSA
• 12.9 — Bosch EDC17CP65 for Ford
• 12.8 — Bosch EDC17C45 for Nissan and Renault light commercial vehicles

SID803 note: Modifications are applied to the MPC file, but both the MPC and external flash files are required for complete decoding.

MD1CS069 note: Additional original files are still useful for broader testing and compatibility verification.

Technical Support and Bug Reports​

When reporting a problem, include as much of the following information as possible:

• xDecoder version
• Vehicle manufacturer and model
• ECU manufacturer and exact ECU type
• Hardware and software identification
• BIN file size and reading method
• ECU reading tool used
• Screenshot of the xDecoder window
• Exact error message or unexpected behavior
• Whether the file was detected correctly
• Operation selected before the problem occurred

Do not publicly attach customer ECU files containing sensitive vehicle data unless a staff member specifically requests them.

Installation Notes​

• Install version 14.0 into a new clean folder
• Do not combine files from different xDecoder versions
• Do not run the application directly from an archive
• Keep all included EXE, DLL and BIN components together
• Always launch the program through START-xDecoder.exe
• Do not start Decoder.exe directly

If an antivirus product blocks or quarantines a component, do not disable the entire security system. Post the exact detection name and affected filename in this thread first.

File Safety​

Always preserve the untouched original ECU read. Work only with a separate copy and save every processed result under a new filename.

A removed DTC does not repair the electrical, mechanical or software-related cause of the fault. Verify the modified file and its checksums before programming it into a control unit.

Download and Full Description​

View the complete description and download xDecoder DTC Manager

Click to expand...

iltecnico said:

HWID AB02CD3F607D21BC

Click to expand...

unknown7 said:

Hi Friends, pls send request code here is my HWID: 4C2E736AEE1487DA

Click to expand...

EdgePerfor said:

604652E0D4978210

Click to expand...

vh1 said:

F3C62B8CE07B47D6

Click to expand...

zoubir13 said:

4514F64D5F54F40B

Click to expand...

zoubir13 said:

4514F64D5F54F40B

Click to expand...

zoubir13 said:

4514F64D5F54F40B

Click to expand...