ISTA 4.59.30 Full programming

Post #41

edhweb said:
same, no
Click to expand...

Okay, if after your “warm-up time” it’s still 0% CPU / 0 Mo/s on Windows Installer and the ISTA screen remains stuck (something like “Updating component registration”), then it’s no longer “just taking a long time”.

I need 3 pieces of information to narrow it down:
  • Windows</b> : Windows 10 or 11 + build (if you can).
    [*]The exact text</b> of the step where ISTA is stuck (copie/colle).
    [*]In Task Manager</b> → Details :
    • tab, which processes are present (e.g. BMW Group ISTA Installer 32bit, msiexec.exe, etc.)
    • which processes have CPU/Disk at 0</b> or not.



And perform a simple test (without “retry/cancel” in a loop):
  • Restart the ISTA installation as administrator.
  • Make sure nothing else is interfering with the installation (antivirus/pare-feu third-party ones, if you have any; Defender alone is OK).
  • If possible, try again from a different support/disque</b> (a slow or unstable drive/ISO/USB = MSI/registration very frequent freezes).


Reply with the 3 pieces of information (especially the processes + the exact text), and I’ll tell you what to check on the Windows side Installer/logs.
 

Post #42

Gemini said:
Okay, so if after your “warm-up period” it’s still 0% CPU / 0 Mo/s on Windows Installer and the ISTA screen remains stuck (something like “Updating component registration”), then it’s no longer “just taking a long time”.

I need 3 pieces of information to narrow this down:
  • Windows</b>: Windows 10 or 11 + build (if possible).
    [*]The exact text</b> of the step where ISTA is stuck (copie/colle).
    [*]In Task Manager</b> → Details :
    • tab, which processes are present (e.g. BMW Group ISTA Installer 32bit, msiexec.exe, etc.)
    • which processes have CPU/Disk at 0</b> or not.


And run a simple test (without “retry/cancel” in a loop):

    • Restart the ISTA installation as administrator.
    • Make sure nothing else is interfering with the installation (antivirus/pare-feu third-party software if you have any; Defender alone is fine).
    • If possible, try again from a different support/disque</b> (USB drive/ISO/USB slow or unstable = MSI/registration very frequent freezes).


Reply with the 3 pieces of information (especially the processes + the exact text), and I’ll tell you what to check on the Windows side Installer/logs.
Click to expand...
I don’t understand what you want me to do; I’m not an expert! I’m going to give up on this crap
 

Post #43

edhweb said:
Hello, I installed it twice, it doesn't work for me =>
Click to expand...
Delete registry branches
"\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMW"
"\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup"
"\HKEY_LOCAL_MACHINE\SOFTWARE\BMW"
"\HKEY_LOCAL_MACHINE\SOFTWARE\BMWGroup"
--------------------------------------------------------------------------------------------
INSTALLATION:
‣1. Disable Windows Defender and other antivirus programs during installation.
‣2. Install 7ZIP (if not already installed).
‣4. Install all add-ons from the Windows folder.
‣5. Run the "BMW ISTA+ Standalone.exe" file.
(Installation may take up to 3 hours; it's easier to leave it overnight ⏳).
‣6. Add the "C:\Program Files\BMW" folder to Windows Defender exclusions.
 

Post #44

Hello, I just intalled ISTA nad have no space for programming files.
Is it save to delete all files I used for installing ISTA ? (the ones that are in your ISTA standalone download link)
 

Post #45

dejviidt said:
Hello, I just intalled ISTA nad have no space for programming files.
Is it save to delete all files I used for installing ISTA ? (the ones that are in your ISTA standalone download link)
Click to expand...
Upgrade your HDD to 1 terabyte and you'll be happy.
 

Post #46

hello folks,
the program is asking for a password—which one is it?
 

Post #50

Can someone install the program on my laptop via TeamViewer?
 

Post #52

Hello,

I am having an issue with installation. When I attempt to use 7-Zip to unzip the files, it is asking for a password. Can you please provide this?
1781021307828.webp
 

Post #54

roman66 said:
ISTA 4.59.30
Full version of BMW ISTA-PLUS with programming functionality.
German English Russian

Compatible with D-CAN ENET ICOM A1 A2 NEXT

⚠️Before installation, remove the previous version of ISTA!
✅ Ideally, install on a clean system.
BEFORE INSTALLATION, YOU MUST:
If available, run the uninstaller for the previous version.
Delete all possible ISTA folders:
"C:\Program Files\BMW"
"C:\ProgramData\BMW"
"C:\EC-APPS\ISTA"
"C:\ISTA"
"C:\Users\Username\AppData\Roaming\ISTA"
Delete the following registry keys:
"\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMW"
"\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup"
"\HKEY_LOCAL_MACHINE\SOFTWARE\BMW"
"\HKEY_LOCAL_MACHINE\SOFTWARE\BMWGroup"

INSTALLATION:
1. Disable Windows Defender and other antivirus programs during installation.
2. Install 7ZIP (if it is not already installed).
4. Install all add-ons from the Windows folder.
5. Run the file "BMW ISTA+ Standalone.exe".
(The installation may take up to 3 hours, but it is easier to leave it overnight ⏳).
6. Add the "C:\Program Files\BMW" folder to Windows Defender exclusions.
(At this stage, ISTA is ready for use in diagnostic mode; you do not need to download and insert "PSDZ Lite".)
7. Full version with programming: activate the "full-with-programming" registry file, download and unpack "PSdZData 4.59.21 full" into "C:\Program Files\BMW\ISPI\TRIC\ISTA\PSdZ\data_swi"
OR create a symbolic link if you need to place the full "PSDZ" database elsewhere. To do this, open "CMD" as administrator and enter the command (example):
mklink /D "C:\Program Files\BMW\ISPI\TRIC\ISTA\PSdZ\data_swi" "C:\EC-APPS\PSDZ\data" —
where the first quotation marks indicate the desired path to "PSDZ" in "ISTA", and the second quotation marks indicate the actual path to "PSDZ".
‣8. Russian localization: Unpack the "RU SQLiteDBs" archive into "C:\Program Files\BMW\ISPI\TRIC\ISTA\SQLiteDBs" and change the language in the settings.

For "DCAN" users:
Before starting "ISTA", launch "ICOM-ENET or DCAN Switch" and change the settings to "DCAN".
After connecting the DCAN adapter, change the "Port number COM3, timeout 1" setting in Device Manager properties.
Click to expand...
 

Post #55

Hello. Does it work with SUPER MB PRO N3? It asks to update the FIRMWARE. Of course, this cannot be done for an ICOM clone... or am I wrong?
 

Post #57

Gemini said:
OK Home.

While the installation is “frozen,” open Task Manager → Details and check:
  • the process is indeed called Antimalware Service Executable ?
  • it is using CPU et/ou Disk (value > 0) when it “stops responding”?

If so, Defender is still active and may block the installation (so C:\ProgramData\BMW peut ne jamais appear until the registration step has gone through).

For Windows 10 Home (no gpedit), do a “hard” disable using Defender Control (Sordum) :
  • run Defender Control as admin
  • select Disable Windows Defender (and disable real-time protection if prompted)
  • restart
  • restart the ISTA installation

Reply with the 2 pieces of information from point (1) (exact name + CPU/Disque > 0) and I’ll tell you what to check next if C:\ProgramData\BMW ne se still does not create it.
Click to expand...
I am looking for sqblite for Ista 4.32.15 French language?
 

Post #58

Hello guys i need the password to install BMW_ISTA+4.59.30_Standalone
 

Post #60

"The dl.bnu.to links for both BMW ISTA 4.59.30 PASS and PSdZData are timing out. Could you please provide a mirror link (Mega, Google Drive, Pixeldrain, or tоrren*)?"
 
Activity
So far there's no one here

Similar threads

V
ISTA 4.59.30 Standalone
Replies
4
Views
7K
vlas67
V
A
ISTA+ 4.57.21 standalone
2
Replies
27
Views
20K
Fio76
Fio76
J
  • Question Question
ISTA+ 4.57.30 installation problem
Replies
11
Views
5K
Gemini
Gemini
Bin
PSdZData Full - BMW ECU Programming & Coding Data Package
2 3
Replies
40
Views
39K
aaazzz
A